News:

Classified ads are not allowed on the forum.

Main Menu

Ground Strap Question

Started by srode, January 08, 2012, 08:34:40 AM

Previous topic - Next topic

srode

Thanks for the picture, I would never have guessed or know this exisited. 
Steve - 02D Z11 and a Plain Jane hardtop

big iron

Sorry for the goof-up my 69 AIM is not clear and I was guessing. ???????
Bob
Quote from: big iron on February 04, 2012, 09:26:17 AM
Shown in the 67-68 AIM U63 A1 but not shown in 69 AIM. Not sure that the 69 had them. The 69 AIM revision 1 shows, "carry over not removed" ???????
Corvette suppliers have them.
Bob

Prackman

Sorry to belabor this issue but I just can not determine where the frame to inner fender ground strap is to be located.  I have viewed the photos provided but still can not determine to on location on my 1969 Z/28.  Can someone provide some more photos for this strap location and maybe some measurements/distances from other body parts?  Thanks - John
John
1969 Z/28 VN Built
1967 SS

69Z28-RS

#63
Go back and review Reply#16 of this thread posted by jk1969Z28...  It shows both the strap location on the inner fender, and where it connects to the frame.  NOTE:  What may not be clear re this topic, is that the strap is NOT in the engine compartment; instead it is inside the passenger side front wheel well area.   The photos shown in reply#16 exactly match where the ground strap was located on my 09C Z28..
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

Prackman

Thanks 69Z28-RS, I now can visualize where the strap should be installed.  Unfortunately I do not have any bolt holes in the inner fender (could be a re-pop) nor the frame.  My Z is a 02D LA build so maybe like other members have stated this fourth strap was not installed there.  Thanks again for getting me looking in the correct location.
John
1969 Z/28 VN Built
1967 SS

69Z28-RS

Quote from: Prackman on April 20, 2014, 03:07:35 PM
Thanks 69Z28-RS, I now can visualize where the strap should be installed.  Unfortunately I do not have any bolt holes in the inner fender (could be a re-pop) nor the frame.  My Z is a 02D LA build so maybe like other members have stated this fourth strap was not installed there.  Thanks again for getting me looking in the correct location.

Based on what others have wrote, this particular feature (4th ground strap) was one of those 'hit and miss' features that may not have been applied 100% of the time... (who's gonna inspect inside the wheel well?).. :)
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

cam69aro

here is mine on my 03E Norwood z28 only saw it on the passenger side of car
Eldon W 1969 z28 Black with born with driveline X77 38,000 miles-sold
2016 z06/z07 Corvette Black

Prackman

Eldon - thanks for the photo.  I have that strap install, it's the strap installed on the other side of the frame rail connecting to the inner fender ahead on the front wheel I was inquiring about
John
1969 Z/28 VN Built
1967 SS

cam69aro

I will have another look at mine and see if I can find it
Eldon W 1969 z28 Black with born with driveline X77 38,000 miles-sold
2016 z06/z07 Corvette Black

cam69aro

this should be the one, this is the best pic I could get of it
Eldon W 1969 z28 Black with born with driveline X77 38,000 miles-sold
2016 z06/z07 Corvette Black

Prackman

PERFECT
Eldon thanks for your quick response and photo.
John
John
1969 Z/28 VN Built
1967 SS

cam69aro

no problem John, glad I could help
Eldon W 1969 z28 Black with born with driveline X77 38,000 miles-sold
2016 z06/z07 Corvette Black