Speedometer Cable Codes

[KurtS]

Date matters, auto vs man trans matters, speedo adapter probably matters. But the usage sometimes changes for unknown (to me) reasons.

Here's what I have for 69 (with a caveat for limited data):
CF (May & later) - V8 auto, Z28, BB auto & man   
CT (pre May) - V8 auto, Z28, BB man   
CV  (pre May) - L6 & low-po auto 
CW - L48/M20, BB auto & man
CX - L65 & L14 man
CY - L65 man

CH is a full-size code. And I've not seen a CX code on a Z, so I think that cable was changed.

[jbtech]

Thanks Troy Abercrombie for submitting this info to me:

1967 Camaro SS 396 4 speed
Build date:  06E
Plant:  NOR
Stamp Code: CA
Grommet Stamp:  (TBD)
Engine: L35
Transmission: M20
Final Gear Ratio: (TBD)

[jdv69z]

Where is the cable stamped? Can I see it easily? Pretty sure mine is original.

[KevinW]

Great info!

CW - L48/M20, BB auto & man (is what I need for my car)

But it would be good to know the original lengths.  I am confused with the lengths the repros are available in.

Thanks!

[David K]

Jdv69z, see post 5...might help.

[cook_dw]

There's no one spot the cables are stamped.  You will just have to look the cable over completely but I'd start at the trans and work towards the firewall.

[x66 714]

Mine was about half way but the next car might not be....Joe

[R68GTO]

Mine is stamped right near the trans fitting

[Mike S]

I'm playing catch-up to posts.
Below is what the 67 LOS has.
Build date: 04B (04/13/1967)
Plant: LOS
Stamp Code: CA
Grommet Stamp: RP
Engine: L35
Transmission: TH400
Final Gear Ratio: 3:07  Rear Prefix- 0404 BJ

[cook_dw]

Awesome thank you Mike.!!.

[169INDY]

Below is what the 68 LOS has.
Build date: 12E (01/03/1968)
Plant: LOS
Stamp Code: CA
Grommet Stamp:
Engine: L35
Transmission: TH400
Final Gear Ratio: 3:07  Rear Prefix- PP  1216 G1

[169INDY]

Below is what the 69 Z11 has.
Build date: 04C (04/21/1969)
Plant: VN (LOS)
Stamp Code: CV
Grommet Stamp:
Engine: L48
Transmission: TH350
Final Gear Ratio: 3:07  Rear Prefix- BL  0326 G2