1969 Front Spoiler to Lower Valance Bolts

[Edgemontvillage]

AMK lists their 'G-4320' kit for the '69 Camaro Z28 front spoiler, and says:  CONI SEMS, HXWA SCREWS, NUTS, WA'S    28 pieces,  $8.00

Has anyone purchased this kit who can tell or show us exactly what was included?

Gary, here is a photo of the AMK G-4320 Kit that I located online. The (4) spoiler to lower valance bolts appear to have an integrated rather than captured washer with no head marking. The nuts appear to be the correct design.  

[69Z28-RS]

Yes, I think I agree Lloyd...  the AMK catalog did not show availability on the correct bolt (with captive washer).  And based on the orientation shown for the hardware in the AIM (bolt in from the bottom thru the spoiler first), the AMK kit has the captive washer on the side which least needs it, and nada on the side needing it (thru the spoiler itself).  

After this discussion, I need to check my spoiler hardware which should be in a bag somewhere..   ..  I know I bought a new spoiler from GM in the mid 70's after buying the car, but I don't recall buying hardware, so there's no telling what I have....

Noting also that the AMK kit includes the bolts/washers/nuts for the braces as well..  accounting for the 28 included pieces.
I didn't find a photo for the G-4320 kit..... is it because I don't know where to look?  

[cook_dw]

Guy over on yenko.net is selling a bolt set.



http://www.yenko.net/ubbthreads/ubbthreads.php/ubb/showflat/Number/572174/gonew/1/correct-factory-d80-spoiler-ha#UNREAD

[69Z28-RS]

Wow..  he's either looking for $750, or $250 each for 3 sets?...  pretty expensive..  but I did like his photography..
I'm sure people are gonna jump all over that..

[Edgemontvillage]

Wow..  he's either looking for $750, or $250 each for 3 sets?...  pretty expensive..  but I did like his photography..
I'm sure people are gonna jump all over that..

$250 per set is my take. Its an interesting "mixed set", 14 of the 28 pieces required are included and a combination of mostly restored with some used/survivor fasteners.

[cook_dw]

He sales a lot of nuts & bolts on there lately..

[firstgenaddict]

I've got 5-5 gallon buckets full of original nuts bolts and clips etc at my dads house.... I know what I'm gonna be doing!

[69Z28-RS]

I bought those from your dad yesterday..  he was cleaning out the garage..    I gave him $10...  even though he said 'take them'..

[DT]

I know this thread was started back in June, I was just curious if the spoiler hardware kit G4320 is still available from AMK   I can't seem to find any info on it.  Thx

[z28z11]

Donny,

Page 354 AMK '69 Body - listed at $8.00, G-4320 28pc. kit.

Regards,
Steve

[DT]

Thanks Steve, I tried entering the number G 4320 and it stated not available.  After the 3rd time I added the dash - with the number G-4320 and it went through.

[Danzo]

Bringing this back to life. Did anyone ever use this kit?
Thanks, Doc.

[Edgemontvillage]

Bringing this back to life. Did anyone ever use this kit?
Thanks, Doc.

Doc I ended up with an original set of hardware, wasn't satisfied with what the AMK kit offered.

[Danzo]

How about this one?
https://www.ebay.com/itm/67-68-69-Camaro-Front-Spoiler-Mounting-Hardware-OE-Style-Kit-GM/232857468428?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160811114145%26meid%3Dd84bf8d154e14005af191c7b1ce64e8f%26pid%3D100667%26rk%3D5%26rkt%3D5%26sd%3D322522312220%26itm%3D232857468428%26pg%3D2045573&_trksid=p2045573.c100667.m2042

[68camaroz28]

How about this one?
https://www.ebay.com/itm/67-68-69-Camaro-Front-Spoiler-Mounting-Hardware-OE-Style-Kit-GM/232857468428?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160811114145%26meid%3Dd84bf8d154e14005af191c7b1ce64e8f%26pid%3D100667%26rk%3D5%26rkt%3D5%26sd%3D322522312220%26itm%3D232857468428%26pg%3D2045573&_trksid=p2045573.c100667.m2042

One cannot see the mfg markings on head and two of the screws have a design that was not even available in 1969.