News:

Classified ads are not allowed on the forum.

Main Menu

Help Finding Part?

Started by DAL777, December 01, 2007, 10:00:24 AM

Previous topic - Next topic

DAL777

Anyone know where to get and or part #'s for the hose, grommet, and connector for an L-48.
It is the hose that goes from the crankcase air filter in the air cleaner assembly to the passenger side valve cover near the rear.

It is on page 101,   6  C8 in the factory assembly manual.....parts # 10, 16, and 17.  I have not seen the correct parts offered in catalogs.

Thanks

1968RSZ28

Quote from: DAL777 on December 01, 2007, 10:00:24 AM
Anyone know where to get and or part #'s for the hose, grommet, and connector for an L-48.
It is the hose that goes from the crankcase air filter in the air cleaner assembly to the passenger side valve cover near the rear.

It is on page 101,   6  C8 in the factory assembly manual.....parts # 10, 16, and 17.  I have not seen the correct parts offered in catalogs.

Thanks

http://www.classicindustries.com/

Paul

DAL777

Paul,
I looked in the catalog.  All they show is an elbow and a hose.  All of the other catalogs list the same stuff.  Nobody has the connector that goes into the valve cover that the hose hooks to.

1968RSZ28

Quote from: DAL777 on December 02, 2007, 08:24:00 PM
Paul,
I looked in the catalog.  All they show is an elbow and a hose.  All of the other catalogs list the same stuff.  Nobody has the connector that goes into the valve cover that the hose hooks to.

Dal777 -

They are there.  Do a "valve cover grommet" search and you will find them.     ;)

Paul

DAL777

Still cant find the piece ("connector") that goes between the hose and grommet.
AL :)

1968RSZ28

Quote from: DAL777 on December 03, 2007, 08:56:00 PM
Still cant find the piece ("connector") that goes between the hose and grommet.
AL :)

DAL777 -

The "connector" (as per the AIM) I believe you are looking for can be found be doing a "air cleaner elbow" search.     :)

Paul

DAL777

If you look at the picture, it is not an elbow.   (You can buy an elbow)
It is a straight piece. 

9T4Z

Dal..   the connector to the valve cover IS a 90 degree elbow that fits into the grommet on the pass rear valve cover.  Be careful of what hose you order.  There is a hose there for the cowl inducted air cleaner that has less of a curve to it.

You can find these parts at Ricks as well.

good luck
Gary 9T4Z

94Z rag blower 491 rwhp (now 505!)
69 Pace Car, 70RS,91Z,91RS

Camaro Billy

Dal, 
You are correct, it is a small straight connector as it is shown on page 101 of the '69 AIM.
Here is a shot of mine, you can't see the connector but it is like the one in the AIM. I could not find anywhere to buy it repop and after about 9 months of searching I found an orig. one at  Calisle for $1.00. I know someone who found a hose at the auto parts store that matched pretty well and just cut the bottom off the 90 degree tube to make the connection.
Billy
1969 RS/SS 350/300 Rallye Green . Black Vinyl Top

DAL777

You got it Billy!
That is the part I need.
Anybody have one?

Thanks

DAL777

I found the connector at a local chevy dealer.  $5.31   !!!!!!!!!

Hose and grommet discontinued in 1988.  Not available.

9T4Z

Dal... oops

I have the L48 as well and assumed they were all the same.  Open element vents differently!

nice to see you found what you needed.  8)
Gary 9T4Z

94Z rag blower 491 rwhp (now 505!)
69 Pace Car, 70RS,91Z,91RS

DAL777

Yea, it is just a straight
piece of pipe.  I could not
believe my local chevy dealer had
them.  I bought three!  The hose
is not available so I got a radiator by pass
hose that works great.