69 camaro 396/375 numbers

[ruquik]

Looking at these block numbers?  Problems??

[x77-69z28]

I don't like them. Block numbers are stamped too high. Don't like the vin either. Circular decking marks.

[ruquik]

Thanks for your input, I was a little worried that the 19N was deeper than the rest or the partial, also. Anyone else thoughts???

[ko-lek-tor]

Here is a real one within a month to compare. IMO your JH has me believing it is not legit.

[MR GMPARTS]

 AT LEAST  THE CORRECT  ASSY CODE IS  ON THE PAD , WHAT ARE YOU TO DO WHEN YOU HAVE TO SQ DECK THE BLOCK , NONE OF YOU GUYS HAVE THE ORIGINAL TIRES OR THE ORIGINAL AIR  IN THE  TIRES....   SPEND YOUR TIME HELPING PEOPLE,   HOW MANY BLOCKS HAVE ANY OF YOU PEOPLE NUMBERED>>>>>>>>>>>>

[x77-69z28]

AT LEAST  THE CORRECT  ASSY CODE IS  ON THE PAD , WHAT ARE YOU TO DO WHEN YOU HAVE TO SQ DECK THE BLOCK , NONE OF YOU GUYS HAVE THE ORIGINAL TIRES OR THE ORIGINAL AIR  IN THE  TIRES....   SPEND YOUR TIME HELPING PEOPLE,   HOW MANY BLOCKS HAVE ANY OF YOU PEOPLE NUMBERED>>>>>>>>>>>>

NONE

[vtfb68]

Mr. GM
   You seem to be clearly on the wrong forum.
    Victor

[69Z28-RS]

AT LEAST  THE CORRECT  ASSY CODE IS  ON THE PAD , WHAT ARE YOU TO DO WHEN YOU HAVE TO SQ DECK THE BLOCK , NONE OF YOU GUYS HAVE THE ORIGINAL TIRES OR THE ORIGINAL AIR  IN THE  TIRES....   SPEND YOUR TIME HELPING PEOPLE,   HOW MANY BLOCKS HAVE ANY OF YOU PEOPLE NUMBERED>>>>>>>>>>>>

You can mask the pad during any decking operation and only deck UNDER the heads...   but this only works IF you want to preserve the original stamping, NOT if you want to eliminate the original and restamp to your nefarious fraudulent purposes!!

[1968RSZ28]

HOW MANY BLOCKS HAVE ANY OF YOU PEOPLE NUMBERED>>>>>>>>>>>>

Zero for me, but it appears you do it a lot...

http://www.ebay.com/sch/thegmparts/m.html?_ipg=50&_sop=12&_rdc=1

Paul

[L78 steve]

Zero for me also. I like to treat other people as I like other people to treat me.

[dale_z28]

I think we touched a nerve

[ruquik]

Don't know about all this other BS being talked about I was just looking for thought on these numbers. My customer bought this car which is real nice and the motor has some issues so he asked me to check it out and check the numbers out. I don't really see any of the original broach marks either?

Thanks

[dale_z28]

Is it possible the block was decked and the numbers restamped? I'm sort of in that boat: decked block, lost numbers. Even if I could "find" them I'm really hesitant to restamp because it would look like a forgery.

[cook_dw]

AT LEAST  THE CORRECT  ASSY CODE IS  ON THE PAD , WHAT ARE YOU TO DO WHEN YOU HAVE TO SQ DECK THE BLOCK , NONE OF YOU GUYS HAVE THE ORIGINAL TIRES OR THE ORIGINAL AIR  IN THE  TIRES....   SPEND YOUR TIME HELPING PEOPLE,   HOW MANY BLOCKS HAVE ANY OF YOU PEOPLE NUMBERED>>>>>>>>>>>>

WTF dude..  I think you need to take it down a notch..  BTW TAKE OFF THE CAPS LOCKS 



Back to the original post.  The block is a restamp in my opinion but would like to see a photo from straight down onto the pad.  If the deck was squared then there would be less of the stampings visible..

[BULLITT65]

AT LEAST  THE CORRECT  ASSY CODE IS  ON THE PAD , WHAT ARE YOU TO DO WHEN YOU HAVE TO SQ DECK THE BLOCK , NONE OF YOU GUYS HAVE THE ORIGINAL TIRES OR THE ORIGINAL AIR  IN THE  TIRES....   SPEND YOUR TIME HELPING PEOPLE,   HOW MANY BLOCKS HAVE ANY OF YOU PEOPLE NUMBERED>>>>>>>>>>>>

MR GM PARTS, I assume this is Mr. Greg Long?