News:

Classified ads are not allowed on the forum.

Main Menu

Original GM Trans-AM Second Gen GM Coil Springs?

Started by mikebaronehouston, April 04, 2020, 07:58:32 AM

Previous topic - Next topic

mikebaronehouston

I have a set of springs which supposedly came from the Hall Chaparral collection.

Part number is X779B440.  I was told this was an experimental GM number. Presumably they are 440#.  I had them tested at an oil-field spring facility--426# and 430# respectively on a very cool compression machine.  Crazy cage around it; I suspect they do so big springs...

Dimensions are .711 wire, 9 coils and 16" free.   I am not sure of the compressed height between the spring pocket and lower A-arm; I'll measure today.

Anyone have a way to decipher and confirm/deny the part number?

Thanks,

Mike
Mike Barone
Houston, TX

Jon Mello

That does not look like a GM part number unless the B is really an 8 however I got no results when I did a search for 7798440.
Jon Mello
CRG

crossboss

Mike,
Most likely the springs were made by an out sorced vendor.
Just another T/A fanatic. Current lifelong projects:
1968 Olds 442 W-30
1969 Mustang Fastback w a Can-Am 494 (Boss 429)

mikebaronehouston

Many thanks.

Now I can cut-to-fit without reservation!
Mike Barone
Houston, TX

crossboss

Mike,
Sorry we did not meet up in Houston and check out our cars. IF you plan to travel to Vegas, send me an email.
-Scott.
Just another T/A fanatic. Current lifelong projects:
1968 Olds 442 W-30
1969 Mustang Fastback w a Can-Am 494 (Boss 429)