I'm sure this info is here somewhere but - How long did it take (start to drive away) for a 1st gen Camaro to be built once it entered the assembly line?
http://www.camaros.org/assemblyprocess.shtml
"Norwood ran two shifts, and produced 57 cars per hour, or 912 per day. It took about two days (four shifts) for a body to go through the Fisher Body system, and another day and a half (three shifts) to go through the Chevrolet system."
Thanks - So, 3 shifts or 24 hours (assuming an 8 hour shift) to fully assemble and drive one Camaro away and 56 total hours of labor, including four 8 hour shifts at Fisher for the body build, for one Camaro. :)
I didn't want to do the math.
56 hours total time to produce... probably alot more than 56 hours of labor...
3500 people (2-shift manpower) x 8 hours = 28,000 man-hours per day
28,000 man-hours divided by 912 units per day = 30.7 man-hours per car.
It took 6-7 shifts (about 3 days) for a Camaro to go from the first underbody welder in the Body Shop to the Shipping Gate.
199.55 man hours... @ 6.5 shifts...
Wow, that's still pretty amazing. I wish my restoration took that long and 30.7 hours to do. Guess I dont have the right tools and setup like the factory did :)
Quote from: Jonesy on March 30, 2008, 12:17:43 PM
Wow, that's still pretty amazing. I wish my restoration took that long and 30.7 hours to do. Guess I dont have the right tools and setup like the factory did :)
We would be turing'em out by the dozens wouldn't we Jonesy? Working with all new parts would have alot to do with it...
Quote from: firstgenaddict on March 30, 2008, 11:08:15 AM
199.55 man hours... @ 6.5 shifts...
Nope. In 6.5 shifts, 2964 units came off the line, which took 91,000 man-hours of labor; 91,000 divided by 2964 = 30.7 man-hours per car.
Wow 30.7 hours is insane to build a car...
John,
What's the approximate time for a present day car?
Quote from: KurtS on March 31, 2008, 11:28:25 PM
John,
What's the approximate time for a present day car?
Around 18 hours per car is considered competitive, just for assembly. Enormous strides have been made since then in automation in the Body and Paint shops; where a 60's Body Shop had 500-700 people per shift (most on spotweld guns), all welding and material handling is now robotic, and a typical Body Shop only has about 140 people, and only about half of those are production folks - the rest are skilled tradesmen tending to the robots. Paint Shops are about the same manpower comparison and level of automation - about the only manual operations today are sealing, and all spraying is automated; basecoats are waterborne, and clearcoat is 2-component catalyzed (and contains carcinogens) - no people in spray booths any more.
After the Paint Shop, Trim, Chassis, and Final Assembly operations are still mostly manual; selected operations (like windshield and backlite setting) are robotic, and many components are now received as ready-to-install "modules", with labor-intensive subassembly done by outside suppliers (seats, wheels/tires, instrument panels, bumper fascias, consoles, front and rear suspension assemblies, etc.).
Thanks, those are numbers that I never dealt with.
Yeah, I know it's hard to do an apples to apples comparison. The vehicle systems are more complex, but much of the subassembly work is outsourced.