Print Page - Power window firewall piercing 1969

Title: Power window firewall piercing 1969
Post by: x66 714 on May 13, 2021, 07:40:57 AM

If a 69 had power windows, is this the same location of the piercing for the orange wire that was used for this power top? Thank you, Joe

Title: Re: Power window firewall piercing 1969
Post by: bertfam on May 13, 2021, 08:20:15 AM

Yes, check out UPC 0, sheet A (number 6), and RPO A31 and C06 in the AIM.

Ed

Title: Re: Power window firewall piercing 1969
Post by: x66 714 on May 13, 2021, 08:37:17 AM

Thanks Ed. I looked at all 3 of those pages & still wasn't certain. I found that picture of a conv RS with power top. If power window is the same, I will pass on the information. Thank you, Joe

Title: Re: Power window firewall piercing 1969
Post by: firstgenaddict on May 13, 2021, 10:27:23 PM

Dave's Conv L78 RS/SS that he sold to Evan M. had PT and PW I need to see if I have a photo of the area.
I am not sure which one it is PW or PT however one orange wire is coming through the hole below the vacuum bulkhead grommet.

(https://lh3.googleusercontent.com/pw/ACtC-3dvaKUWfACVpVLd_vV1fk-SdbXl0KlbS_d7Hl4FlilJ2dY4TbFedLn5p3R30KO3V71TG-y1Ja9pudX1NTck0fJQUXHVd15rz6NK5nG883zR1V9qNKpZyvg0F7hgq37YscBFBO-cJTU1wt8Ggfwy91UMmg=w1422-h948-no?authuser=0)

Title: Re: Power window firewall piercing 1969
Post by: x66 714 on May 15, 2021, 05:35:06 AM

Thank you James....Joe

CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: x66 714 on May 13, 2021, 07:40:57 AM