Author Topic: Original style exhaust system for 67ssrs?  (Read 9227 times)

erik67ssrs

  • Newbie
  • *
  • Posts: 5
    • View Profile
Original style exhaust system for 67ssrs?
« on: July 22, 2006, 02:54:02 AM »
I have a 67 ssrs which is mostly original, including the engine 350/295.  My exhaust system is wrong and I want to replace it with an original style (transverse muffler) system.  Any comments on brands, fit, quality of aftermarket exhausts would be appreciated.  I don't want anything too loud, nor anything too quiet (I know these are subjective).  I have heard D&R and Walker sell good replacements.

rich69rs

  • Hero Member
  • *****
  • Posts: 1119
  • LF7/M35/Z22/Z87
    • View Profile
Re: Original style exhaust system for 67ssrs?
« Reply #1 on: July 22, 2006, 09:03:36 PM »
Last year I replaced the dual exhaust that was on my 69 RS with a stainless exhaust manufactured by Stainless Works and purchased through Summit Racing.  Very nice system.  The tail pipe from the back of the wheel well area is polished chrome over the stainless.  This particular exhaust system was designed by Stainless Works to be a bolt in replacement for the original and was designed to bolt up to stock exhaust manifolds.  I also believe they make a system(s) for header applications.  Unit fits nice under the car and mated up well with the hanger locations.  Pipes are mandrel bent.  Muffler is not loud, but is not stock quiet - I was looking for a little throatiness and it sounds pretty good.  Standing behind the car you wouldn't suspect a base 327 under the hood.

Pic shows fit of transverse muffler and tail pipes with the polished exhaust tips.
« Last Edit: July 22, 2006, 09:11:02 PM by rich69rs »
Richard Thomas
1969 RS

x77-69z28

  • Hero Member
  • *****
  • Posts: 1058
    • View Profile
Re: Original style exhaust system for 67ssrs?
« Reply #2 on: August 16, 2006, 05:57:48 PM »
i just got a gardner exhaust system for my 67 rs/ss. i am in the middle of a frame off and haven't started it yet, but the quality is amazing. they are exact reproduction pieces. check out their website at www.gardnerexhaust.com.
69 Z/28 X77 burnished brown, 711 int 05A bought in 78
70 Z28 forrest green, green int, M40, bk vinyl roof PROJECT
99 SS hugger orange 6spd NO TTOPS bought new 1 of 54
15 z/28 Arctic white, A/C 505 HP #251

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: Original style exhaust system for 67ssrs?
« Reply #3 on: August 17, 2006, 06:16:57 AM »
There is nothing like a Gardner system... they fit with no cutting, bending, hammering, etc...
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

jeff68

  • Member
  • ***
  • Posts: 432
    • View Profile
Re: Original style exhaust system for 67ssrs?
« Reply #4 on: August 17, 2006, 08:00:55 PM »
I have a Stainless Works system that I purchased many, many years ago.  The fit was perfect and it is louder than stock, but not too much.  If you are looking to go stainless, I would suggest this system.
68 L30/M20 Convertible, Ash Gold
N10, F41, N34, Z21, ZJ9, Z87, D55, G80, P01, U17

dans67camaro

  • Member
  • ***
  • Posts: 44
    • View Profile
Re: Original style exhaust system for 67ssrs?
« Reply #5 on: October 15, 2006, 10:43:37 PM »
I had a 67 SS/RS in 67. The correct system would have had 2 seperate runs (true dual) from the exh. man through to the transverse muffler. However, there were 2 resonators in the system just before the pipes went over the rear the axle, on either side of the driveshaft. I believe Ground Up Restorations sells such a system, with and w/o resonators. I'm restoring my 67 and plan on going with the resonators. Good Luck!