« previous next »
Pages: [1] 2  All

Author Topic: 68 RS wheel well mouldings  (Read 16568 times)

Rick68

  • Member
  • ***
  • Posts: 62
    • View Profile
68 RS wheel well mouldings
« on: April 25, 2012, 06:39:42 PM »
I was at a Camaro show last year and met a guy who gave me a photo copy of the template that was included with the GM wheel well mouldings for a 1968 RS.It shows where to cut the front mouldings since the rear ones were already shortened.Anybody out there need this?
Logged

vtfb68

  • Hero Member
  • *****
  • Posts: 527
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #1 on: April 25, 2012, 09:52:09 PM »
rick,
R/S mouldings going on a R/S should not have to be cut. This is from GM?
   VT
Logged
68 05C LA RS/SS U2 712 L34 M21 BR
68 08E LA RS Y2 749 L30 M35
67 11B LA  RS/SS M-1 797-Z L48 M21  Convertible

acelr8

  • Member
  • ***
  • Posts: 43
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #2 on: April 26, 2012, 02:14:02 AM »
Yes,they came with 880 & 881s from GM in the 70's right after they discontinued the RS only fronts
Logged

Rick68

  • Member
  • ***
  • Posts: 62
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #3 on: April 26, 2012, 11:06:08 AM »
The instruction sheet is dated Feb 2 1974 and has a picture of the moulding and where to cut it and drill the hole for the screw.On the bottom of the sheet it says"REWORK REQUIRED WHEN USING UNIT 9785880-81 ON 1968 CAMARO RALLY SPORT (Z22).
Logged

vtfb68

  • Hero Member
  • *****
  • Posts: 527
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #4 on: April 26, 2012, 02:00:55 PM »
I bought 4 new 68 R/S wheel mouldings from Champion Chevrolet in Manhatten Beach in 1980. Installed them two years ago with a repaint, they fit perfect, came with small package of screws, all holes were correct, and no instructions at all.
   
  VT
Logged
68 05C LA RS/SS U2 712 L34 M21 BR
68 08E LA RS Y2 749 L30 M35
67 11B LA  RS/SS M-1 797-Z L48 M21  Convertible

ChrisM

  • Member
  • ***
  • Posts: 51
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #5 on: April 26, 2012, 10:09:57 PM »

Can you post a picture?
Logged

Rick68

  • Member
  • ***
  • Posts: 62
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #6 on: April 29, 2012, 11:30:25 PM »
I have been trying to post pictures of the instruction sheet but I am having problems.Anybody have problems posting pictures?
Logged

69pace

  • Hero Member
  • *****
  • Posts: 536
    • View Profile
    • TeamCamaro - Moderator
Re: 68 RS wheel well mouldings
« Reply #7 on: April 30, 2012, 12:30:15 AM »
Rick if you are actually posting the pic it maybe too large a file. If you have Google plus or other internet share account you can post it there then link here with no size restrictions.
Logged
1969 Z-11 350/300 with 4 Speed
TeamCamaro - Moderator

1968RSZ28

  • Hero Member
  • *****
  • Posts: 6188
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #8 on: April 30, 2012, 01:09:58 AM »
Quote from: Rick68 on April 29, 2012, 11:30:25 PM
I have been trying to post pictures of the instruction sheet but I am having problems. Anybody have problems posting pictures?

Rick, picture posting information can be found here...  http://www.camaros.org/forum/index.php?topic=7809.0

Paul
Logged

x77-69z28

  • Hero Member
  • *****
  • Posts: 1058
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #9 on: May 02, 2012, 05:36:29 PM »
rick, i could use a copy of the instructions. a friend of mine has a 68 RS and cant understand why his NOS mldgs dont fit. my email is rwagner@optonline.net
thanks
buddy
Logged
69 Z/28 X77 burnished brown, 711 int 05A bought in 78
70 Z28 forrest green, green int, M40, bk vinyl roof PROJECT
99 SS hugger orange 6spd NO TTOPS bought new 1 of 54
15 z/28 Arctic white, A/C 505 HP #251

Rick68

  • Member
  • ***
  • Posts: 62
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #10 on: May 04, 2012, 10:55:45 AM »
DO you have another E-mail because both times I tried to send it  and it came back.NOt only do I have problems posting pictures now I have problems sending E-mail !!!!!
Logged

1968RSZ28

  • Hero Member
  • *****
  • Posts: 6188
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #11 on: May 04, 2012, 04:04:07 PM »
Rick,

Send the photo to me and I'll post it for you.   ;)

Paul
Logged

Rick68

  • Member
  • ***
  • Posts: 62
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #12 on: May 07, 2012, 12:29:58 AM »
Paul
 What is your e-mail address so I can send you the instruction sheet for you to post for me.Thanks
                                             
         Rick
Logged

1968RSZ28

  • Hero Member
  • *****
  • Posts: 6188
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #13 on: May 07, 2012, 04:49:10 PM »
Quote from: Rick68 on May 07, 2012, 12:29:58 AM
Paul
 What is your e-mail address so I can send you the instruction sheet for you to post for me.Thanks
                                             
         Rick

Rick,

Click on my user name and you'll see it listed.

Paul
Logged

1968RSZ28

  • Hero Member
  • *****
  • Posts: 6188
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #14 on: May 09, 2012, 06:52:17 PM »
Here are Rick's photos of the wheel opening molding modification instruction sheet for '68 Camaros equipped with Z22...



Thanks Rick!

Paul
Logged
Pages: [1] 2  All
« previous next »
 

anything