Author Topic: V1226DZ block (Read 6680 times)

x66 714 · « **on:** April 21, 2012, 12:25:00 AM »

A block with V1226DZ should have the partial vin on that same pad...correct?.....Joe

1968RSZ28 · « **Reply #1 on:** April 21, 2012, 01:16:47 AM »

The Norwood plant stamped the VIN on the engine pad on early cars and moved the stamp by the oil filter in the December 68 timeframe. Los Angeles was not as consistent and the VIN stamp location varied during the year.

Paul

x66 714 · « **Reply #2 on:** April 21, 2012, 03:03:47 AM »

I looked at both areas of the block where the vin should be & no sign of anything ever being in either place. The block is perfectly clean. I guess I need to take a picture of what stamps are there..Joe

1968RSZ28 · « **Reply #3 on:** April 21, 2012, 03:53:46 AM »

Joe,

Post a picture of the engine assembly stamp and Kurt will let you know if it's original.

Paul

mickeystoys69RSSS · « **Reply #4 on:** April 22, 2012, 06:55:51 PM »

Perfectly clean sounds like it my have been decked with the block plant/date/model code restamped.

z10kl · « **Reply #5 on:** April 22, 2012, 10:13:23 PM »

Sometimes real hard to see down by oil filter. Especially if still had paint on it.

x66 714 · « **Reply #6 on:** April 24, 2012, 12:21:36 AM »

Here's a picture of the stamps...Joe

KurtS · « **Reply #7 on:** April 24, 2012, 02:52:14 AM »

That's an original stamping.

News:

Author Topic: V1226DZ block (Read 6680 times)

x66 714

V1226DZ block

1968RSZ28

Re: V1226DZ block

x66 714

Re: V1226DZ block

1968RSZ28

Re: V1226DZ block

mickeystoys69RSSS

Re: V1226DZ block

z10kl

Re: V1226DZ block

x66 714

Re: V1226DZ block

KurtS

Re: V1226DZ block