Author Topic: Engine Paint!  (Read 23598 times)

1968 Z28

  • Hero Member
  • *****
  • Posts: 562
    • View Profile
Engine Paint!
« on: April 18, 2009, 02:32:12 AM »
Can someone recommend a good engine enamel that looks  like the original?  I started painting some of my external engine parts today and am not pleased with the color hue.....seems to be somewhat subdued....not bright enough as I want it to be.  It is VHT Sp123....makes a good finish but It does not seem to be the right hue.

Thanks in advance for any info you can provide.

Sonet
Jerry G.

Z28-1968-07C-Norwood
Ermine White, Red Std. Interior
2nd. Owner, 38,000 miles

rat pack

  • CRG Member
  • *****
  • Posts: 223
    • View Profile
Re: Engine Paint!
« Reply #1 on: April 18, 2009, 05:06:32 AM »
The best matching paint is by Martin Senour sold at most NAPA stores, but the bad is they no longer offer it in a rattle can. Their old part number for the rattle can is #7887, and their paint formulas for a spray gun are #90T 9954 or #99L 9954. Both are enamels, but the first one is acrylic enamel which most NAPA dealers can mix. The later is a synthetic enamel which very few dealers still stock. I have not found a suitable rattle can color available anywhere, but then again I haven't painted an engine with spray paint in years, it is all done with a spray gun.........................RatPack................
Just keep livin......L I V I N .............

77thor

  • Member
  • ***
  • Posts: 329
    • View Profile
Re: Engine Paint!
« Reply #2 on: April 18, 2009, 02:10:41 PM »
A lot of people with show cars around here use Bill Hirsch engine enamel
(800-828-2061) .... I don't know if they have a website. They are in NJ.
1969 Camaro SS, 350(NOM), M21, 12 Bolt Posi, 01B LOS Build
1977 Camaro, 350(LM1), M20, 10 Bolt Posi, Purchased New, (SOLD)

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: Engine Paint!
« Reply #3 on: April 18, 2009, 06:49:41 PM »
Many of the Corvette guys who don't have access to spray equipment prefer Quanta's Chevy Engine Orange; good color, and it's not as high-gloss as many of the other rattle-can paints (the original engine paint wasn't high-gloss).

www.quantaproducts.com
'69 Z/28
Fathom Green
CRG

1968 Z28

  • Hero Member
  • *****
  • Posts: 562
    • View Profile
Re: Engine Paint!
« Reply #4 on: April 18, 2009, 09:12:10 PM »
The best matching paint is by Martin Senour sold at most NAPA stores, but the bad is they no longer offer it in a rattle can. Their old part number for the rattle can is #7887, and their paint formulas for a spray gun are #90T 9954 or #99L 9954. Both are enamels, but the first one is acrylic enamel which most NAPA dealers can mix. The later is a synthetic enamel which very few dealers still stock. I have not found a suitable rattle can color available anywhere, but then again I haven't painted an engine with spray paint in years, it is all done with a spray gun.........................RatPack................
RatPack....this looks like the paint you mentioned....just not from NAPA though.
      http://www.yearone.com/pco/8_0907/full.asp?Page=0180

Thanks for the info....will put this on my list of supplies and suppliers.
Sonet
Jerry G.

Z28-1968-07C-Norwood
Ermine White, Red Std. Interior
2nd. Owner, 38,000 miles

1968 Z28

  • Hero Member
  • *****
  • Posts: 562
    • View Profile
Re: Engine Paint!
« Reply #5 on: April 18, 2009, 09:15:01 PM »
Many of the Corvette guys who don't have access to spray equipment prefer Quanta's Chevy Engine Orange; good color, and it's not as high-gloss as many of the other rattle-can paints (the original engine paint wasn't high-gloss).

www.quantaproducts.com
Hey John.....Thanks again for always coming to my rescue, will add this supplier to my list.  Looks like a good site.

Sonet
Jerry G.

Z28-1968-07C-Norwood
Ermine White, Red Std. Interior
2nd. Owner, 38,000 miles

Jerry@CHP

  • CRG Member
  • *****
  • Posts: 1533
    • View Profile
Re: Engine Paint!
« Reply #6 on: April 19, 2009, 02:33:11 AM »
Both me and my business, Camaro Hi-Performance have been using the Seymour, EN48 since the early 1990s.  This color is right on the money and matches the two survivor engines in my collection.  Most of the other paints are too thick and not quite right in color, and much of the casting patina goes away when you apply these other paints.  The EN48 goes on nice, it's available in a rattle can and also shows off the actual casting patina when done.

Jerry

1968 Z28

  • Hero Member
  • *****
  • Posts: 562
    • View Profile
Re: Engine Paint!
« Reply #7 on: April 19, 2009, 03:40:50 AM »
Hey ....Thanks, Jerry....Was looking at the Seymour but had not seen any comments on it.  Will sure keep it in mind.  Now back to stripping and cleaning the paint off of the parts already painted.  Oh well....one step forward and two back.....LOL.

Sonet
Jerry G.

Z28-1968-07C-Norwood
Ermine White, Red Std. Interior
2nd. Owner, 38,000 miles

Jerry@CHP

  • CRG Member
  • *****
  • Posts: 1533
    • View Profile
Re: Engine Paint!
« Reply #8 on: April 19, 2009, 08:51:45 PM »
I think Quatra is repackaging the Seymour paint and marketing under their name.......and selling it for more money.  I think John and I had this discussion before and came up with the same conclusion.

Jerry

1968 Z28

  • Hero Member
  • *****
  • Posts: 562
    • View Profile
Re: Engine Paint!
« Reply #9 on: April 19, 2009, 09:38:26 PM »
I think Quatra is repackaging the Seymour paint and marketing under their name.......and selling it for more money.  I think John and I had this discussion before and came up with the same conclusion.

Jerry
Well I found the Seymour for a lot less than the Quanta.....bought 6 cans shipped to me for a total of $24.33.  Thanks again guys for helping me out.

Sonet (Jerry Gortney)
Jerry G.

Z28-1968-07C-Norwood
Ermine White, Red Std. Interior
2nd. Owner, 38,000 miles

Jerry@CHP

  • CRG Member
  • *****
  • Posts: 1533
    • View Profile
Re: Engine Paint!
« Reply #10 on: April 20, 2009, 12:56:39 PM »
You can't go wrong.  Many resto shops try to over engineer the painting of an engine and many of these hi-tech engine paints that require use of a spray guy is way over kill and most of the time, these paints are too thick, too glossy and do not look like a factory painted engine.

Jerry

68Zproject

  • Hero Member
  • *****
  • Posts: 1869
    • View Profile
Re: Engine Paint!
« Reply #11 on: May 05, 2009, 02:57:48 AM »
I realize I got in on this a little late, but a guy on TC told me he used some stuff called Aervoe.  I found them and they shipped a case of 6 for $20.00 or so.  I was really happy with it and the color is spot on.
68Z28

69z28rsbilly

  • Member
  • ***
  • Posts: 80
    • View Profile
Re: Engine Paint!
« Reply #12 on: May 12, 2009, 09:27:09 PM »
 Where do I find the Seymour, EN48 ?

I too wasnt very happy with the VHT.......seemed like it needed about 4 coats to look decent.
X33 72 72 RS
X33 71 71 RS
X33 10 10

1968 Z28

  • Hero Member
  • *****
  • Posts: 562
    • View Profile
Re: Engine Paint!
« Reply #13 on: May 13, 2009, 01:04:03 AM »
I bought mine at this link listed below but you have to buy a minimum of one case (6 Cans)
           http://www.ryderfleetproducts.com/cgi-bin/ryderfp/products/product_detail.jsp?BV_SessionID=@@@@1075969558.1242176029@@@@&BV_EngineID=ccccadegmkekmdecfkmcgfmdfoldflm.0&oid=49808

Like Jerry said above......it is not as thick and it shows the detail of the cast iron better.

Jerry G.
Jerry G.

Z28-1968-07C-Norwood
Ermine White, Red Std. Interior
2nd. Owner, 38,000 miles

x77-69z28

  • Hero Member
  • *****
  • Posts: 1058
    • View Profile
Re: Engine Paint!
« Reply #14 on: May 13, 2009, 03:11:04 AM »
i just ordered a case
69 Z/28 X77 burnished brown, 711 int 05A bought in 78
70 Z28 forrest green, green int, M40, bk vinyl roof PROJECT
99 SS hugger orange 6spd NO TTOPS bought new 1 of 54
15 z/28 Arctic white, A/C 505 HP #251