« previous next »
Pages: [1] 2  All

Author Topic: GM 14x6 Trim Ring Quality  (Read 23153 times)

jeff68

  • Member
  • ***
  • Posts: 432
    • View Profile
GM 14x6 Trim Ring Quality
« on: July 29, 2008, 04:34:15 PM »
Has anyone purchased a set of GM rally wheel trim rings recently?  How is the quality?  I'm looking into sending my rings out to be restored, but they are the 'inside clip' style, which means that the few little dings in them can not be removed.  So it looks like I may just order a new set of GM rings.

Also, can anyone confirm the correct GM part number for these 14x6 rings?  I believe it is 475019, but I haven't been able to confirm.

Thanks,
Jeff
Logged
68 L30/M20 Convertible, Ash Gold
N10, F41, N34, Z21, ZJ9, Z87, D55, G80, P01, U17

Pacecarjeff

  • Member
  • ***
  • Posts: 379
    • View Profile
    • pacecarjeff.com
Re: GM 14x6 Trim Ring Quality
« Reply #1 on: July 30, 2008, 01:14:38 AM »
    
That looks like a good number - let me know what these are like?

GM PART # 475019

GM LIST: $134.17
OUR PRICE: $82.32

      
DESCRIPTION: RING WHL  15 5/8" outer diameter, 1.86" offset, 4 clip attachment, and fits 14" x 6" rally wheel.
Logged

jeff68

  • Member
  • ***
  • Posts: 432
    • View Profile
Re: GM 14x6 Trim Ring Quality
« Reply #2 on: July 30, 2008, 10:39:45 AM »
^ That's what I found on GMpartsdirect.com as well.  I just hate to order a set and find out that they have the 'usual' GM parts imperfections (scratches, dings, etc.).  The last set I bought of these was way back in the mid 80's and they were very nice at that time.
Logged
68 L30/M20 Convertible, Ash Gold
N10, F41, N34, Z21, ZJ9, Z87, D55, G80, P01, U17

Mark

  • CRG Member
  • *****
  • Posts: 1089
    • View Profile
Re: GM 14x6 Trim Ring Quality
« Reply #3 on: July 30, 2008, 03:27:18 PM »
Is that for a set?  Thats not an original GM part number for sure, its probably some kind of repro part number that GM licences and sells.  Those 4 clip attachment setups suck, they rattle if the rivets attaching them to the ring get even a little loose.
Logged
Mark C.
1969 Indy Pace Car
350/300HP RPO Z11

lakeholme

  • Hero Member
  • *****
  • Posts: 2497
  • 68-12D L30/M35
    • View Profile
Re: GM 14x6 Trim Ring Quality
« Reply #4 on: July 30, 2008, 04:04:00 PM »
I got a set from Classic Muscle a few months ago for my 68 and they look great, but I think in the long run Mark's comment about the 4 clip setup will prove true.  They fit tight at first, but I can see how they will rattle eventually.

Ed may be able to give you the original part #, which would start with a 39... (I think).  I'd give you the service # but I'm 500 miles from my P&A
Logged
Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director

Pacecarjeff

  • Member
  • ***
  • Posts: 379
    • View Profile
    • pacecarjeff.com
Re: GM 14x6 Trim Ring Quality
« Reply #5 on: July 30, 2008, 04:07:18 PM »
No- that price is one ring
It is a GM number from GMpartsdirect.com
They provide authentic GM parts. - nice to deal with.
Don't know the ring quality these days?
Logged

x77-69z28

  • Hero Member
  • *****
  • Posts: 1058
    • View Profile
Re: GM 14x6 Trim Ring Quality
« Reply #6 on: July 30, 2008, 04:48:20 PM »
just watch the "shipping and handling" with gmpartsdirect. they give the stuff away at just above cost, but make it up on handling.
Logged
69 Z/28 X77 burnished brown, 711 int 05A bought in 78
70 Z28 forrest green, green int, M40, bk vinyl roof PROJECT
99 SS hugger orange 6spd NO TTOPS bought new 1 of 54
15 z/28 Arctic white, A/C 505 HP #251

plasiter

  • Member
  • ***
  • Posts: 38
    • View Profile
Re: GM 14x6 Trim Ring Quality
« Reply #7 on: July 30, 2008, 08:20:40 PM »
Rick Miller does awesome work on trim ring restoration.  He did an original set for my 67Z, and I've seen his handiwork on other cars at Carlisle legends judging this year.  If you are interested, please send me a private message and I'll pass on his contact information.  Paul
Logged
1967 Z/28 - Factory Special Order Flambeau Red Paint (Close to Hugger Orange) in 1967!

jeff68

  • Member
  • ***
  • Posts: 432
    • View Profile
Re: GM 14x6 Trim Ring Quality
« Reply #8 on: July 30, 2008, 11:56:51 PM »
Thanks Paul.  I have already been in contact with Rick.  My style of clips differ from the 'correct' outside clip trim rings which Rick usually deals with.  We're trying to figure out what can be done with mine.  I'm hopeful that I can just send him my trim rings and have them come back fully restored.  I'll try to keep everyone posted on what happens.
Logged
68 L30/M20 Convertible, Ash Gold
N10, F41, N34, Z21, ZJ9, Z87, D55, G80, P01, U17

Mark

  • CRG Member
  • *****
  • Posts: 1089
    • View Profile
Re: GM 14x6 Trim Ring Quality
« Reply #9 on: July 31, 2008, 01:18:26 AM »
Heres the GM Service Part Numbers from a Camaro 1972 Master Parts Catalog.

3923522 - 1967/ALL EXC 302 ENGINE

3901704 - 1967/ALL WITH 302 ENGINE

3923522 - 1968/ALL WITH 14 IN RALLY WHEEL — FIRST JOBS HAVE NOTCH FOR VALVE STEM

3934892 - 1968/ALL WITH 14 IN RALLY WHEEL — AFTER JOBS HAVE HOLE FOR VALVE STEM

3901704 - 1968/ALL WITH 15 IN RALLY WHEEL — WITH DISC BRAKES

3901708 - 1968/ALL WITH 15 IN RALLY WHEEL — EXC DISC BRAKES

3934892 - 1969/ALL WITH 14 IN STD WHEEL /OPTION P06/
1969—71/ALL WITH 14 IN RALLY WHEEL /OPTION ZJ7/ EXC 350 /300 HP/ AND 396 ENGINE

9796919 - 1969-70/ALL WITH 14 IN RALLY WHEEL /OPTION ZJ7/ WITH 350 /300 HP/ AND 396 ENGINE
1969/ALL WITH 14 IN SUPER SPORT WHEEL /OPTION N66/

3901708 - 1969/ALL WITH 15 IN WHEEL

GMpartsdirect is a dealer in North Carolina (I think) they sell GM parts, but they also sell the same licensed GM repro parts that most of the Camaro parts places sell.  By the part number (it doesn't fit into GMs longer part number scheme and has no correlation to previous Service part numbers) I would suspect that these rings would be the same ones that Ricks, Year One, or any of the others sell.
« Last Edit: July 31, 2008, 01:24:07 AM by Mark »
Logged
Mark C.
1969 Indy Pace Car
350/300HP RPO Z11

Pacecarjeff

  • Member
  • ***
  • Posts: 379
    • View Profile
    • pacecarjeff.com
Re: GM 14x6 Trim Ring Quality
« Reply #10 on: July 31, 2008, 07:11:29 PM »

9796919 - 1969-70/ALL WITH 14 IN RALLY WHEEL /OPTION ZJ7/ WITH 350 /300 HP/ AND 396 ENGINE
1969/ALL WITH 14 IN SUPER SPORT WHEEL /OPTION N66/

I found someone with those still in stock NOS - from before they were discontinued.
Kinda expensive at $197 each. Are they really worth that much?
Logged

jeff68

  • Member
  • ***
  • Posts: 432
    • View Profile
Re: GM 14x6 Trim Ring Quality
« Reply #11 on: August 01, 2008, 04:23:18 PM »
Quote from: Mark on July 31, 2008, 01:18:26 AM
By the part number (it doesn't fit into GMs longer part number scheme and has no correlation to previous Service part numbers) I would suspect that these rings would be the same ones that Ricks, Year One, or any of the others sell.
Well, the local Chevy dealer punches 475019 into their system and comes up with the 14x6 trim ring as a valid part.  At first, they questioned the part number too, but there it was.
Logged
68 L30/M20 Convertible, Ash Gold
N10, F41, N34, Z21, ZJ9, Z87, D55, G80, P01, U17

jeff68

  • Member
  • ***
  • Posts: 432
    • View Profile
Re: GM 14x6 Trim Ring Quality
« Reply #12 on: August 01, 2008, 04:33:19 PM »
UPDATE:  The 'inside clip' type rings have a clip ring that can not be removed like the 'outside clip' trim rings that Rick restores.  Therefore, dents & dings can not be removed from them as part of the restoration.

It looks like I'll pick up a set of new trim rings - I just need to decide which ones.
Logged
68 L30/M20 Convertible, Ash Gold
N10, F41, N34, Z21, ZJ9, Z87, D55, G80, P01, U17

Pacecarjeff

  • Member
  • ***
  • Posts: 379
    • View Profile
    • pacecarjeff.com
Re: GM 14x6 Trim Ring Quality
« Reply #13 on: August 01, 2008, 05:47:33 PM »
I was at my shop yesterday and I looked up on my shelf where I have a few sets of trim rings.
I have 4 GM boxes with that 475019 number.
They are the old 4 clip style and are in fact real old GM parts.
Will try to get some pictures this weekend.
Logged

jeff68

  • Member
  • ***
  • Posts: 432
    • View Profile
Re: GM 14x6 Trim Ring Quality
« Reply #14 on: August 01, 2008, 08:29:16 PM »
Pacecarjeff - I sent you a PM.
Logged
68 L30/M20 Convertible, Ash Gold
N10, F41, N34, Z21, ZJ9, Z87, D55, G80, P01, U17
Pages: [1] 2  All
« previous next »