Author Topic: 1967 camaro #3916323 engine block  (Read 13224 times)

red67l78

  • Member
  • ***
  • Posts: 63
    • View Profile
1967 camaro #3916323 engine block
« on: February 13, 2008, 05:51:26 PM »
This is also a good casting number for L78 camaros in late 67 production?   There is one for sale on camaro.net and this brought it to my attention that it only shows the "406 " for the 67 camaro on CRG.   I have talked to guys with the 323 block in these camaros  but have not seen first hand.  Is this true?  I was always told that late in production year you could have a 406 or 323 block?  I was thinking around last week in June and throught July?

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5979
    • View Profile
Re: 1967 camaro #3916323 engine block
« Reply #1 on: February 13, 2008, 08:05:21 PM »
This is also a good casting number for L78 camaros in late 67 production?   There is one for sale on camaro.net and this brought it to my attention that it only shows the "406 " for the 67 camaro on CRG.   I have talked to guys with the 323 block in these camaros  but have not seen first hand.  Is this true?  I was always told that late in production year you could have a 406 or 323 block?  I was thinking around last week in June and throught July?
Not sure where you are looking on CRG, but http://www.camaros.org/drivetrain.shtml#BlockCast shows both 406 and 323 castings for 67.
Yes, it was used at the end of the model year.
Kurt S
CRG

rare4k

  • Member
  • ***
  • Posts: 96
    • View Profile
Re: 1967 camaro #3916323 engine block
« Reply #2 on: February 13, 2008, 10:13:40 PM »
In my notes on L78'S the 406 block was used up until  06E (june) then they started the 323 block in 07A (july) I've Never seen a Born with 323 block any Earlier

red67l78

  • Member
  • ***
  • Posts: 63
    • View Profile
Re: 1967 camaro #3916323 engine block
« Reply #3 on: February 14, 2008, 12:05:21 AM »
Kurt
When i went to the  "67 model id " and hit that page.  I scrolled down and it showed the block casting numbers there in the list.  The only one listed for 67 was the 406 block.  That is the page i was looking at.  When i went to the 68 id there it showed both the 323 and 440 which is right.
« Last Edit: February 14, 2008, 12:12:40 AM by red67l78 »

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5979
    • View Profile
Re: 1967 camaro #3916323 engine block
« Reply #4 on: February 14, 2008, 02:30:22 AM »
Thanks! That's why I asked. I forgot that page had casting info too. I need to go thru all 3 ID pages and confirm what is there.

The drivetrain page is correct. :)
Kurt S
CRG

red67l78

  • Member
  • ***
  • Posts: 63
    • View Profile
Re: 1967 camaro #3916323 engine block
« Reply #5 on: February 27, 2008, 03:11:18 PM »
I just found a old posting for a engine of   TO7O5MY  7N253976
and casting of 406 block and dated as D-!-7
Was this block DOC as correct.
To me the assembly date would work for the vin dating in production.
This is in reguards to when the 406 went out of production for camaros

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5979
    • View Profile
Re: 1967 camaro #3916323 engine block
« Reply #6 on: February 27, 2008, 10:43:01 PM »
I fixed the error on the ID page.

That 7N253976 block is an original.
Kurt S
CRG

red67l78

  • Member
  • ***
  • Posts: 63
    • View Profile
Re: 1967 camaro #3916323 engine block
« Reply #7 on: February 27, 2008, 11:16:29 PM »
That shows that the 406 block was used till the end of prodution, well into July?   Also you did a GREAT job on updating the info on
your site. The details of your site are what makes it great.
Charlie

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5979
    • View Profile
Re: 1967 camaro #3916323 engine block
« Reply #8 on: February 28, 2008, 04:11:04 AM »
It's not surprising to see both blocks used at the same time as long as they interchanged.

Thanks!
Kurt S
CRG

Steve Shauger

  • Hero Member
  • *****
  • Posts: 633
    • View Profile
    • Vintage Certification
Re: 1967 camaro #3916323 engine block
« Reply #9 on: March 05, 2008, 03:48:35 AM »
The earliest 323 block casting date I have seen is June 15th (F15)
Steve Shauger
Vintage Certification™ Program, Providing Recognition And Status To Unrestored Vehicles.  The Supercar Registry-www.yenko.net-

red67l78

  • Member
  • ***
  • Posts: 63
    • View Profile
Re: 1967 camaro #3916323 engine block
« Reply #10 on: March 18, 2008, 06:35:04 PM »
The date on my 406 block is   E 31 7

 

anything