1967 Camaro Pin Stripes

[onebad34]

I was recently told that all 1967 Camaros that had a nose stripe also had the factory pin strip across the tops of the fenders, doors, and rear quarters.  Is this true?  Does anyone have any information, which cars had the pin stripe?

[lakeholme]

Take a look at D96 here:

http://www.camaros.org/pdf/options-rpo23feb00.pdf

[onebad34]

Am I understanding the RPO, D96 that only the RS and 11 cars had the pin stripes?  Thanks for the info.  Pete

[onebad34]

I believe the D96 stripes were not available for the 67 cars.  correct?.  The D96 started at the bottom of the fender well and followed up around and straight back half way the panel.  The pinstripe I am refering to is a point to start and into twin pin stripes from front to back over the fender wells and back into a point.

[lakeholme]

Still compares to the D96 in the 68 AIM.  Let me just say the 67 RS option did include a painted full length, dual line pinstripe.

[onebad34]

I believe you are right,but I have seen standard 67's also with the pinstripe. Did the factory use this stripe on the RS models only?  thanks  Pete

[RAfbody]

My 67 coupe non rs car is bolero red and had the factory white pin stripes so it is not an rs only thing.

[onebad34]

Do you know if your Bolereo Red car had the stripes b/c of an additional option or not?  My 67 SS 396 coupe is a non RS car and I have the original window sticker and it does not have the pin stripe listed on it.  I'm just curious if the pin stripe came along with the nose stripe. 

[bertfam]

D96 was available on any 1968 or 1969 Camaro as a "stand alone" option (Not available in 67 as a "stand alone" option). It came standard on 1967 and 1969 Camaro's with the Z22 Rally Sport option, but for some reason, not the 1968 Rally Sport. It also came standard on the 1969 Z11 Pace Car and the 1967 and 1969 Camaro with the Z21 Style Trim option.

As for colors, the same rule applies to the D96 striping as to the rest of the striping.

Ed

[heatsinker]

My '67 SS - 396/325 has the striping and from my research has had it from original purchase. I have copied and pasted this from a reply over at the TC site............

For 1967 Camaros:

All cars ordered with the Style Trim Group (Z21) got the side pin stripes, wheel opening moldings, and bright roof drip gutter moldings.

All Rally Sports (Z22) have the side pin stripes because the Style Trim Group (Z21) was part of the RS package.

SS cars only got the bumble bee stripe unless ordered as an RS/SS or an SS with the Style Trim Group. Then they would have both the bumble bee and side pin stripes.
__________________
The whole thread showing my car from 1967 and the rest of the replies........
http://www.camaros.net/forums/showthread.php?t=104073

[onebad34]

That last piece of information is very helpful.  That is close to the same thing that I heard from another reliable source.  If anyone else has another opinion please post it.  Also, which cars recived the blacked out rocker panels? 

[bertfam]

Yes, 67 and 69 Z21. Forgot to put 67 down above. I've edited my original to include that.

Ed

[onebad34]

I want to thank everyone.  My car is a 67 SS and has the style trim group. it also has the interior trim group to include the chrome pillar mlds.  outside has the wheel well mldgs,bumble bee stripe, blacked out tail pan and molding trim at the rocker panels.  I believe the stainless mldgs at rocker panels were only RS models .  The car is going for paint this week and I will be adding the pinstripes.  again thanks.

[JohnZ]

A '69 Z/28 with Z21 Style Trim (X33 car) didn't get the D96 pinstripes that other Style Trim cars got; it was deleted when Style Trim was ordered on a Z/28.

Saw a Fathom Green restored '69 SS yesterday at Camaro Superfest that had Z/28 stripes on it AND the Z21/D96 pinstripes - looked weird.

[copo69]

John, Was it possible to delete the D96 pinstripes on a '69 Style Trim car?