1969 door jamb screw questions

[Danzo]

Guys looking for info on the correct screws for the U-jamb seals, vent and the single kick panel screw up on the "dog leg" for a 05A Norwood coupe. I have read the posts where both silver and phosphate has been observed. Does anyone have part numbers for these screws? Pictures are always welcome.
Ty, Doc.

[william]

Phosphate, in my experience.

[Danzo]

Thanks William. Can anyone share pictures of the 3 screws in question off the vehicle? Part numbers?
Ty, Doc

[Dusk Blue Z]

Here are pictures of the screws from my 05A Z/28. 100% that these were the original screws. Picture on the right is the repop seal and supplied screws.

Mike

[Danzo]

Thanks Mike, any pictures of the door jamb vent or "dog leg" screw?
Doc

[Dusk Blue Z]

Here is a picture of the vent screw. I don't have a picture stored from the restoration in 2012, as I only documented items that were different from the original hardware. Pretty sure in this case I installed the new screw supplied with the vent.

On my recent 4C Z10 restoration, the new vent screw supplied was black.

Mike