Wiper arms

[67conv6cyl]

Dose anyone know the correct part numbers for convertible wiper arms.
I have a parts book however no part numbers on this item.

I just want to see if my 67 wiper arms are the correct originals.

[67conv6cyl]

Here is a. Picture of my wiper arm

[Petes L48]

It's UPC 1 Sheet A3 in the AIM.

3916687, or 3916688 is the optional for a vert.  I assume the Trico was primary and Anco was the optional

FWIW I also saw 3893839 Trico listed in a 1966 parts book.

[rare396bronze]

1969 Chevrolet parts book says 3916688  trico 67-68 camaro convertible! Hope this helps. They are shorter than the coupe!

[67conv6cyl]

So the wiper arm I posted is not correct for a 67 convertible?

[rare396bronze]

I would take measurement of the arm and post it in a picture off it. I don't think the the gm part is stamped on the arm!

[Petes L48]

Your picture showed Patent numbers, not part numbers.  I don't recall the part number being stamped or cast on the arms either.

[67conv6cyl]

Hear is picture of the complete arm

[rare396bronze]

Looks right just checked my convertible. With my blade off 13 1/4 long fully pushed down. All the numbers on the arm matches mine.

[169INDY]

Are all of the Short Arms stamped "CONV" ??
My 69's are.

Jim

[dannystarr]

I know the convertible arm is 1" shorter than hard top. At least in '67 & '68. Danny

[Sauron327]

I know the convertible arm is 1" shorter than hard top. At least in '67 & '68. Danny

69 too. Restored all three years and sold off all my convertible wiper arm stock. Ready to scrap my hardtop ones. Tired of saving inventory.

[rare396bronze]

Don't see conv stamped on my 68 arms or a spare set i have. Only thing stamped on them is what is pictured on 67conv6cyl!

[Pacecar]

67 Arms should be brighter than 68 and 69, noticeable at the knuckle

[Petes L48]

Didn't see a CONV on my 67 arms either, but was using a flashlight and small mirror, while staying away from the paint.