Author Topic: SIDE PIN STRIPS  (Read 7026 times)

ALLZS

  • Member
  • ***
  • Posts: 133
    • View Profile
SIDE PIN STRIPS
« on: September 13, 2021, 12:44:32 AM »
DID ALL RALLY SPORT EQUIPED CAR HAVE THE THIN PIN STRIP ON THE FENDER & QUARTER PANEL INCLUDING Z28 CARS WITH RS OPTION

william

  • CRG Member
  • *****
  • Posts: 3194
    • View Profile
Learning more and more about less and less...

Gars68Tux

  • Member
  • ***
  • Posts: 259
    • View Profile
Re: SIDE PIN STRIPS
« Reply #2 on: September 13, 2021, 07:07:22 AM »
I guess you're referring to 69's ?
Garth

68 RS L30 AA 749 Fred Gibb Chevrolet

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: SIDE PIN STRIPS
« Reply #3 on: September 13, 2021, 07:31:36 AM »
On 67 Z28 with RS they got the pinstripes - Z28 with style trim I assume the same.
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

Gars68Tux

  • Member
  • ***
  • Posts: 259
    • View Profile
Re: SIDE PIN STRIPS
« Reply #4 on: September 13, 2021, 10:25:06 AM »
No mention of pin stripes on the doors in the original post, thus my assumption he's referring to 69...?
Garth

68 RS L30 AA 749 Fred Gibb Chevrolet

ALLZS

  • Member
  • ***
  • Posts: 133
    • View Profile
Re: SIDE PIN STRIPS
« Reply #5 on: September 13, 2021, 12:48:18 PM »
[/img]

ALLZS

  • Member
  • ***
  • Posts: 133
    • View Profile
Re: SIDE PIN STRIPS
« Reply #6 on: September 13, 2021, 12:51:32 PM »
not the best picture but I am talking about the ones on the side that are on the fender and follow into the door and on the quarter  the reason I ask I have a 3 week of sept 1968 z28 and in a old picture is has these pin stripes

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: SIDE PIN STRIPS
« Reply #7 on: September 13, 2021, 10:59:10 PM »
IT is possible to have the D96 pins on a 69 Z built the 3rd week of Sept 1968.

This is from the link William posted in the first response - and the most relevant response of that thread is from William and states:
I interpret this to indicate is D96 was now optional with Z/28 or DX1 and Z21/Z22, no longer included.

This insinuates some very early production Z21 and Z22 Z/28s were built with D96. June 2014 there was an early production [mid-September '68] Z/28-RS on ebay. The car was rough and had a poor repaint early in its life. The repaint had mostly flaked off and D96 striping was visible.

Guessing here, I'd say Z21 & Z22 Z/28s included D96 striping for a short period of time. Per the Showroom Album Revision, D96 was no longer included but became optional as of late September '68. As a discrete option, D96 is rare, 5,176 cars. At some point, possibly the January '69 revision, the one stripe per car restriction was put in place.   

Based on my db by the end of September '68 only 600-700 Z/28s had been produced. Of those about 58% had Z21 or Z22. That's about 400 cars; maybe a few more were also ordered with D96. Small wonder I have never seen an OE paint Z/28 with D96.

In conclusion, best guess D96 on a Z/28 with Z21/Z22:

August-September '68 probably included
October '68-December '68 optional but very rare
January '69 to the end of production-no longer available.
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

ALLZS

  • Member
  • ***
  • Posts: 133
    • View Profile
Re: SIDE PIN STRIPS
« Reply #8 on: September 15, 2021, 12:13:01 AM »
well I guess I will pin strip it and see if I like it

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5781
  • owner since 4-Apr-1976
    • View Profile
Re: SIDE PIN STRIPS
« Reply #9 on: September 15, 2021, 02:07:12 AM »
The original stripes were a tape kit weren't they?
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5979
    • View Profile
Re: SIDE PIN STRIPS
« Reply #10 on: September 15, 2021, 02:55:39 AM »
No, installed with Buegler paint stripers.
« Last Edit: September 16, 2021, 04:10:34 AM by KurtS »
Kurt S
CRG

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5781
  • owner since 4-Apr-1976
    • View Profile
Re: SIDE PIN STRIPS
« Reply #11 on: September 15, 2021, 03:20:35 AM »
Thanks Kurt...  sounds too labor intensive for a production line, and is probably why the later decision was made to minimize 'stripes' to only one stripe set per car... ?
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

william

  • CRG Member
  • *****
  • Posts: 3194
    • View Profile
Re: SIDE PIN STRIPS
« Reply #12 on: September 15, 2021, 04:28:44 AM »
Was not done free hand. Plastic guides were positioned on the body; workers rolled the striping tool along the guides.

As built, ZL-1 Camaro #59 had white D96 stripes on one side, black on the other.
Learning more and more about less and less...

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5979
    • View Profile
Re: SIDE PIN STRIPS
« Reply #13 on: September 16, 2021, 04:16:46 AM »
Same thing they use today for striping in the plants. It's been more than a few years - I always remember the car moving and the stripe heads striping the car as it goes by. But if the line shuts down mid-stripe that's a problem so either they had a repair process or (more likely) the striper moved independent of the line. When I was in the plant, it was automated - it picked up the reference points and moved per the guides. In the plants I was in, this was done on the flat-top conveyor on the final line.
« Last Edit: September 16, 2021, 05:49:42 PM by KurtS »
Kurt S
CRG

william

  • CRG Member
  • *****
  • Posts: 3194
    • View Profile
Re: SIDE PIN STRIPS
« Reply #14 on: September 16, 2021, 02:56:07 PM »
https://www.yenko.net/forum/showthread.php?t=166463&highlight=beugler

Link to assembly line pics of Pontiacs being pin-striped.
Learning more and more about less and less...