Author Topic: confirmation 400 ?  (Read 4852 times)

jonesey

  • Newbie
  • *
  • Posts: 16
    • View Profile
confirmation 400 ?
« on: June 27, 2015, 02:59:16 AM »
Hi guys....just like to confirm these numbers if anybody could help.
I think it is a 73 400 block ?? Not sure of the numbers on tranny - supposed to be a TH350
What you think ??
Thanks.

VINCE Z28

  • Hero Member
  • *****
  • Posts: 760
    • View Profile
Re: confirmation 400 ?
« Reply #1 on: June 27, 2015, 12:46:53 PM »
The 3951511 for 1973 is a 400cid with 2 bolt mains,the 1970 and '71 400's have 4 bolt mains. Post a better pic of the trans numbers and you'll get an answer.
" He who knows naught, knows not that he knows naught"  It's not you...  It's just the way my brain is wired.

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5979
    • View Profile
Re: confirmation 400 ?
« Reply #2 on: June 27, 2015, 04:52:37 PM »
Easier to tell the trans type by the pan shape.
That # looks like a partial VIN.
Kurt S
CRG

jonesey

  • Newbie
  • *
  • Posts: 16
    • View Profile
Re: confirmation 400 ?
« Reply #3 on: June 27, 2015, 07:51:13 PM »
Thanks Kurt,so I its a 73 400 block 2 bolt.
Here is a closer number of the tranny and I put another coupla pics in ..there is another number on bottom of tranny its pretty hard to see and also the number on the front of the motor..I seem to have a problem with this one.

jonesey

  • Newbie
  • *
  • Posts: 16
    • View Profile
Re: confirmation 400 ?
« Reply #4 on: June 27, 2015, 07:54:45 PM »
Sorry missed the bottom tranny #
Pretty hard to see

cook_dw

  • Hero Member
  • *****
  • Posts: 4076
    • View Profile
Re: confirmation 400 ?
« Reply #5 on: June 27, 2015, 09:22:44 PM »

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5979
    • View Profile
Re: confirmation 400 ?
« Reply #6 on: June 28, 2015, 12:14:16 AM »
I see Y1K..... on the trans pan.
That's a TH350 code. Made here in Ypsilanti in the old bomber plant.
Kurt S
CRG

jonesey

  • Newbie
  • *
  • Posts: 16
    • View Profile
Re: confirmation 400 ?
« Reply #7 on: June 28, 2015, 05:43:21 AM »
Thanks.
The pan is that 350 shape so that's good.I looked up that town and it is near Detroit ?
Here is a better look at that other tranny number which is stamped up front on your drivers side near the block.

 

anything