...
He also wants to know if anyone can help him acquire a pretty rare option that originally came with his car. He states that he has, "been trying to locate the fiber optic wire for the front turn lights to the fenders, no one in the after market offers that item. Do you know of any outfit that might have that item!!! please let me know."
There is nothing to the fiber optic 'system' except for the indicators and the fiber optic itself (a coated glass fiber light conveyer).. If he only needs the fiber optic line itself (if his is missing or broken in half), then a corvette supplier would be the best source, as all Corvettes built in several years between '68-9 and 1971 Corvettes had them. Many people think they are more complicated than they are. A response to a similar question on the Corvette Forum addressed this issue very well, which I will repeat here:
"There is nothing mechanical or electrical about fiber optics. They are very simple. Just fiber strands that transmit light very easily, from the light source to the individual lenses in the console. The purpose of these items was to show the driver if there was an external light bulb that was not functioning.
Here are a few of the common reasons why a fiber optic does not work. Check to see if the bulb is burnt out. If the lights were removed to have the car repainted, it is not uncommon for the fiber optic end to get painted over and not allow light to travel to the console. The fiber cable could be broken as a result of a previous accident. Check inside the console to see if the fiber optic cable is connected to the console lenses. When I first got my car, I found some of the cables just not connected to the console lense.
Anyway, this is very basic technology and it is not like trying to run down an electrical problem. As was previously stated, if you have a problem it is pretty easy to just re-run new fiber cable and re-tape it into the harness. IMO. "
ie.. to have them work, the fiber optic line must 1) be present, 2) be clean on the ends, and 3) be installed in the fittings of the console and lamp source.