Author Topic: Original Muncie bolts - head markings info  (Read 8924 times)

zman1969

  • Member
  • ***
  • Posts: 153
    • View Profile
Original Muncie bolts - head markings info
« on: March 11, 2013, 01:05:52 PM »
I have the Muncie out of my 69 and was searching here and Team Camaro to find what bolts are correct for the Muncie trans, please if you have any pictures or information on any 67-69 Muncie's please share the information. I know my side cover bolts are incorrect, I am just trying to make it closer to day 1- thanks all!
Rich
69 RS/Z DZ302 Daytona bumble bee
69 T/A clone LS6/6sp
69 Nova SS 396

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5781
  • owner since 4-Apr-1976
    • View Profile
Re: Original Muncie bolts - head markings info
« Reply #1 on: March 11, 2013, 02:35:26 PM »
seems pretty unusual to me to have *incorrect* side cover bolts...?  Are you sure they are incorrect?  Did you piece the trans together from parts?
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

zman1969

  • Member
  • ***
  • Posts: 153
    • View Profile
Re: Original Muncie bolts - head markings info
« Reply #2 on: March 12, 2013, 02:33:17 AM »
unusual? when I built this trans 15 years ago they were mis matched then so I installed grade 8 bolts that i know are incorrect - how unusual is that?
Rich
69 RS/Z DZ302 Daytona bumble bee
69 T/A clone LS6/6sp
69 Nova SS 396

rszmjt

  • Member
  • ***
  • Posts: 279
    • View Profile
Re: Original Muncie bolts - head markings info
« Reply #3 on: March 12, 2013, 03:22:57 AM »
Most 69 Z28 trans have "SBC" on the 3 upper tailhousing and 2 shorter tailhousing bolts, and usually "TR" or L5 on the longer singular tailhousing bolt. Either "SBC" or "TR" side cover bolts. Earlier cars pre Jan/69 seem to use the "TR", later cars use "SBC"
 I have also seen "RBW" tailhousing bolts.
BTW, lots of trans have mismatched bolts, I dont think the Muncie plant cared, the workers used what ever was in the bin. GM did use different suppliers. FWIW.

lynnbilodeau

  • Member
  • ***
  • Posts: 409
    • View Profile
Re: Original Muncie bolts - head markings info
« Reply #4 on: March 14, 2013, 02:33:45 PM »
My side cover bolts are sbc.

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5979
    • View Profile
Re: Original Muncie bolts - head markings info
« Reply #5 on: March 25, 2013, 11:53:50 PM »
There were several different suppliers (cause fasteners are a commodity), but I've seen these on sidecovers:
67 - SBC
68 - SBC
69 - TR & SBC

I also recall seeing an L.
Kurt S
CRG

Steve Shauger

  • Hero Member
  • *****
  • Posts: 633
    • View Profile
    • Vintage Certification
Re: Original Muncie bolts - head markings info
« Reply #6 on: March 26, 2013, 04:12:04 PM »
Kurt IIRC I've seen a few later 69 built cars with L side cover bolts. Not sure there is a correlation to build date but they were certainly used.
Steve Shauger
Vintage Certification™ Program, Providing Recognition And Status To Unrestored Vehicles.  The Supercar Registry-www.yenko.net-

rszmjt

  • Member
  • ***
  • Posts: 279
    • View Profile
Re: Original Muncie bolts - head markings info
« Reply #7 on: March 26, 2013, 09:02:18 PM »
Kurt IIRC I've seen a few later 69 built cars with L side cover bolts. Not sure there is a correlation to build date but they were certainly used.

Steve,  I personally have never seen "L" bolts on camaros, but lots of 64,65  Corvettes/Chevelles etc. with the "325" case., not to say it didnt happen.
 I have Also seen "A" on 70 up Camaros/Chevelles

 

anything