Author Topic: 69 Z power brake tag on power brake vacuum hose  (Read 7015 times)

sixt9x33rs

  • Hero Member
  • *****
  • Posts: 980
    • View Profile
69 Z power brake tag on power brake vacuum hose
« on: December 15, 2009, 12:06:39 PM »
Did the 69 have the "CU" cardboard tag that hung on the vacuum hose from the power brake booster to the manifold, or was that just a 68 item?
'69 RS Z/28 65B, 711 Flat hood no spoiler, endura, 4:10 43K miles
69 X77 Z/28 69 69 711 Original Paint Unrestored (Sold)
'69 X66 Convertible 69B 712 auto, (Sold) 44K miles

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: 69 Z power brake tag on power brake vacuum hose
« Reply #1 on: December 15, 2009, 04:29:46 PM »
Did the 69 have the "CU" cardboard tag that hung on the vacuum hose from the power brake booster to the manifold, or was that just a 68 item?

Yes, 69's had that tag - photo below.
'69 Z/28
Fathom Green
CRG

sixt9x33rs

  • Hero Member
  • *****
  • Posts: 980
    • View Profile
Re: 69 Z power brake tag on power brake vacuum hose
« Reply #2 on: December 15, 2009, 06:03:56 PM »
Thanks John.
Is that picture from your car? Is that hose clamp correct for '69. I noticed the "mickey mouse ears" on the clamp and thought about the style clamps that are correct for a 67 Corvette per the Technical Information and Judging Guide, and wondered if the Corvette style clamps would be correct for this application.
'69 RS Z/28 65B, 711 Flat hood no spoiler, endura, 4:10 43K miles
69 X77 Z/28 69 69 711 Original Paint Unrestored (Sold)
'69 X66 Convertible 69B 712 auto, (Sold) 44K miles

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: 69 Z power brake tag on power brake vacuum hose
« Reply #3 on: December 16, 2009, 03:29:56 PM »
Thanks John.
Is that picture from your car? Is that hose clamp correct for '69. I noticed the "mickey mouse ears" on the clamp and thought about the style clamps that are correct for a 67 Corvette per the Technical Information and Judging Guide, and wondered if the Corvette style clamps would be correct for this application.

Those spring clamps weren't exclusive to the Corvette - they were used on all Chevrolet car lines; that clamp was on the car when I bought it, but it should have the sharp, square "ears", not the one in the photo with rounded "ears". I don't remember when the ears changed, but I think it was after 1969.
'69 Z/28
Fathom Green
CRG

jdv69z

  • Hero Member
  • *****
  • Posts: 1275
  • 69 RS Z/28 52E
    • View Profile
Re: 69 Z power brake tag on power brake vacuum hose
« Reply #4 on: December 16, 2009, 09:34:19 PM »
I believe that I have the same or similar clamp holding the short flexible fuel line running to the fuel pump to the metal fuel line from the gas tank.

Jimmy V.
Jimmy V.

sixt9x33rs

  • Hero Member
  • *****
  • Posts: 980
    • View Profile
Re: 69 Z power brake tag on power brake vacuum hose
« Reply #5 on: December 17, 2009, 02:58:09 AM »
I believe that I have the same or similar clamp holding the short flexible fuel line running to the fuel pump to the metal fuel line from the gas tank.

Jimmy V.
I believe that I have the same or similar clamp holding the short flexible fuel line running to the fuel pump to the metal fuel line from the gas tank.

I have the square "ear" clamps on my fuel lines. I just cleaned and reused them when I painted and cleaned up my car.

Jimmy V.
'69 RS Z/28 65B, 711 Flat hood no spoiler, endura, 4:10 43K miles
69 X77 Z/28 69 69 711 Original Paint Unrestored (Sold)
'69 X66 Convertible 69B 712 auto, (Sold) 44K miles

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: 69 Z power brake tag on power brake vacuum hose
« Reply #6 on: December 17, 2009, 04:25:12 PM »
I believe that I have the same or similar clamp holding the short flexible fuel line running to the fuel pump to the metal fuel line from the gas tank.

Jimmy V.

The spring clamps on the rubber fuel lines are a smaller size, and are green.
'69 Z/28
Fathom Green
CRG

sixt9x33rs

  • Hero Member
  • *****
  • Posts: 980
    • View Profile
Re: 69 Z power brake tag on power brake vacuum hose
« Reply #7 on: December 18, 2009, 11:27:58 AM »
Ok I was wondering if those were the same clamps and if the color was the same. The black sure looks better than the green.
I believe that I have the same or similar clamp holding the short flexible fuel line running to the fuel pump to the metal fuel line from the gas tank.

Jimmy V.

The spring clamps on the rubber fuel lines are a smaller size, and are green.
'69 RS Z/28 65B, 711 Flat hood no spoiler, endura, 4:10 43K miles
69 X77 Z/28 69 69 711 Original Paint Unrestored (Sold)
'69 X66 Convertible 69B 712 auto, (Sold) 44K miles

BlackoutSteve

  • Member
  • ***
  • Posts: 397
    • View Profile
Re: 69 Z power brake tag on power brake vacuum hose
« Reply #8 on: December 18, 2009, 12:43:46 PM »
It'a a drab olive green.. Doesn't look bad..
Other sizes were a dark red oxide color too.
Restoring my RHD 69 Jane in Melbourne, Australia.
http://www.usmuscle.com.au/Forum/showthread.php?t=2840

 

anything