Author Topic: 1968 Astro Ventillation ball finish  (Read 3913 times)

Oregonjam

  • Member
  • ***
  • Posts: 237
  • 68 ss350
    • View Profile
1968 Astro Ventillation ball finish
« on: July 07, 2009, 08:15:47 PM »
I have what I think are the original astro vent balls for in dash air conditioning and they have a black finish on the flat portion of the fins. The chrome plating is crazed so I bought a set of reproductions. The repros do not have any masked black painted areas on the fins.

I would like to confirm what the orignal vent balls should look like and if any one has recommendations for a replacement or restoring originals.

This is on an 07D 1968 AC car.
68 07D SS350
John

rat pack

  • CRG Member
  • *****
  • Posts: 223
    • View Profile
Re: 1968 Astro Ventillation ball finish
« Reply #1 on: July 07, 2009, 10:31:36 PM »
They were black on the inside. You must have the cheaper repros as the ones from Rick's (CHQ) have the correct finish on the fins. Don't try to tape them off to be painted as the clear lacquer that is sprayed over the chrome on those cheap ones will come off with removal of the tape....been there, done that.............RatPack..................
Just keep livin......L I V I N .............

Oregonjam

  • Member
  • ***
  • Posts: 237
  • 68 ss350
    • View Profile
Re: 1968 Astro Ventillation ball finish
« Reply #2 on: July 08, 2009, 01:48:39 PM »
That's what I needed to know. I added it to my next Ricks order list.
Thanks again...
68 07D SS350
John