Author Topic: Temp guage reading  (Read 2900 times)

RogerN

  • Newbie
  • *
  • Posts: 13
    • View Profile
Temp guage reading
« on: August 02, 2020, 03:20:27 PM »
I have a 69 z with the 302. What is the 'normal' temp guage reading?

After starting and driving the car, the temp guage moves slowly (within about 5 minutes) from cold to 3/4 of the way to the top (just below the grey shaded area below the 'H') and stays there. This is in 80 to 90 degree weather.

The engine does not seem especially hot. I also used an infrared thermometer. The top radiator hose read about 175 degrees and the bottom hose read about 155 degrees.

rwg68z

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Temp guage reading
« Reply #1 on: August 07, 2020, 11:12:55 PM »
Those factory 'gauges' are one step above idiot lights. If your concerned about the status of the engine, quality after market gauges are the way to go.  According to your thermal gun your engine is operating normally, maybe a tad bit on the cool side.

69302DZ

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Temp guage reading
« Reply #2 on: August 17, 2020, 12:35:43 AM »
My stock DZ and stock gauge register a little below midpoint even on a pretty hot day. I haven't checked the hose with my infrared gun but will next time I have it out and think about it. The coolant level is about 3" from the top for what that's worth.
'69 Z28 Fathom Green X77
'66 Corvette Nassau Blue L79 Coupe

Fred Mertz

  • Member
  • ***
  • Posts: 108
    • View Profile
Re: Temp guage reading
« Reply #3 on: August 17, 2020, 04:57:43 PM »
Just a hair above the 1/4 mark when warmed up.

GMPP ZZ383/425hp crate engine with stock radiator.

 

anything