Author Topic: Stove Pipe Question  (Read 3584 times)

69 ice cat 8

  • Newbie
  • *
  • Posts: 9
    • View Profile
Stove Pipe Question
« on: December 05, 2018, 10:31:32 PM »
Hello Members,
 Does anyone know is a stove pipe heat riser from a 6 cylinder '68 Camaro will fit a 327-210 hp '68 Camaro?
Thanks in advance.

bertfam

  • Hero Member
  • *****
  • Posts: 4492
    • View Profile
Re: Stove Pipe Question
« Reply #1 on: December 06, 2018, 12:37:39 AM »
I moved your thread from the Site Comments section, but I believe the answer is no. The 6 banger pipe (P/N 3915952) is longer and shaped differently than the LF7 pipe (P/N 3917680).

Ed

bcmiller

  • CRG Member
  • *****
  • Posts: 4101
    • View Profile
Re: Stove Pipe Question
« Reply #2 on: December 06, 2018, 12:51:17 AM »
Do you need one for a 327? Send me a pm.
Bryon / 1968 Camaro SS 396 coupe - now old school 468 big block
1967 Camaro RS/SS 396 coupe L35/M40 - 4 generation family project
Looking for 68 Camaro with body # NOR 181016

bertfam

  • Hero Member
  • *****
  • Posts: 4492
    • View Profile
Re: Stove Pipe Question
« Reply #3 on: December 06, 2018, 01:09:22 AM »
Bryon, also note there's a difference between the LF7 pipe (P/N 3917680) and the L30/L48 pipe (P/N 3916309).

Ed

bertfam

  • Hero Member
  • *****
  • Posts: 4492
    • View Profile
Re: Stove Pipe Question
« Reply #4 on: December 06, 2018, 01:49:08 AM »
Hard to tell Bryon.

HERE'S ONE ON EBAY to compare.

Ed

bcmiller

  • CRG Member
  • *****
  • Posts: 4101
    • View Profile
Re: Stove Pipe Question
« Reply #5 on: December 06, 2018, 02:29:30 AM »
Not sure if this one is for a 1968 base 327 or not. Might be L30 and L48 with automatic trans.
« Last Edit: December 06, 2018, 04:03:33 AM by bcmiller »
Bryon / 1968 Camaro SS 396 coupe - now old school 468 big block
1967 Camaro RS/SS 396 coupe L35/M40 - 4 generation family project
Looking for 68 Camaro with body # NOR 181016

bertfam

  • Hero Member
  • *****
  • Posts: 4492
    • View Profile
Re: Stove Pipe Question
« Reply #6 on: December 06, 2018, 03:08:42 PM »
I don't think yours is the LF7 Bryon. I think yours is the L30/L48 version as you suspect. Here's what the LF7 looks like (see attached). Notice that the end that attaches to the air cleaner doesn't bend up as much as yours.

Ed

 

anything