« previous next »
Pages: [1]

Author Topic: Question on this.  (Read 7135 times)

69Z28

  • Hero Member
  • *****
  • Posts: 928
  • 69 X33D80 Z28
    • View Profile
Question on this.
« on: July 10, 2023, 12:13:23 AM »
Hello everyone. Been a while. Helping a guy out with this. What do y'all think? If that supposed to be a BLH that would be a 1990 305, but not with that casting number. Unless of course that casting number has been modified, which I have read is happening.
« Last Edit: July 10, 2023, 12:54:46 AM by 69Z28 »
Logged
GaryC

'UNRESTORED' 1969 Cortez Silver Z28 X33 D80

69Z28

  • Hero Member
  • *****
  • Posts: 928
  • 69 X33D80 Z28
    • View Profile
Re: Question on this.
« Reply #1 on: July 10, 2023, 12:23:54 AM »
Casting number. Waiting to see the casting date.
Logged
GaryC

'UNRESTORED' 1969 Cortez Silver Z28 X33 D80

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5781
  • owner since 4-Apr-1976
    • View Profile
Re: Question on this.
« Reply #2 on: July 10, 2023, 12:03:50 PM »
It's much more likely that the stamping was modified than the casting no modified.

3956618       68-79       302/327/350       2 & 4-Bolt

If the stamping was modified it appears to me that this engine suffix was originally 'EH' .. but someone overstamped the B (or 3) over the E...  producing a BH which I don't have in my reference.

Of course the engine deck/pad has also been milled (or otherwise modified) so it doesn't show the original machine marks, so it could also be a complete RESTAMP, but I'm leaning towards an overstamp as above...

The EH suffix was used in '68 on 250hp/327 ci engines in Chevelles...as well as some earlier occurrences...
Logged
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

cook_dw

  • Hero Member
  • *****
  • Posts: 4076
    • View Profile
Re: Question on this.
« Reply #3 on: July 10, 2023, 01:26:27 PM »
If I had to guess I'd say the H & B are flipped in the gang.  That would fall in line with a L48 w/ auto.  What is the casting date?
Logged

bertfam

  • Hero Member
  • *****
  • Posts: 4492
    • View Profile
Re: Question on this.
« Reply #4 on: July 10, 2023, 01:47:13 PM »
Any three digit suffix code that starts with a number (in this case the number "8") is for commercial, agricultural, marine, etc... Things like pumps and generators.

Ed
Logged

Stingr69

  • Hero Member
  • *****
  • Posts: 910
    • View Profile
Re: Question on this.
« Reply #5 on: July 10, 2023, 01:51:09 PM »
The pad shape is right for a '69 and the casting number is right for a '69.  The Flint plant assembly stamp is not right for a car.  The implied assembly date of March 26th, 1969 would line up with the short time period this casting was used but the rest of the assembly stamp has too many digits as the "8" does not belong there and the 2 letter suffix does not match up with any typical car application.  Casting date has not been shown yet but I would expect it to be around March something of '69.  If there is a VIN derivative on the pad by the oil filter we might be able to pin it down but without that info, we are just spitballing in the dark.

If there is no VIN derivative there, this blocks original configuration will never be determined.  No reason to worry about it.  It would be just another engine block.
Logged

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5781
  • owner since 4-Apr-1976
    • View Profile
Re: Question on this.
« Reply #6 on: July 10, 2023, 01:54:05 PM »
Ed,  Do you have a reference for the Commercial, AGri, etc.. stampings??
Logged
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

bertfam

  • Hero Member
  • *****
  • Posts: 4492
    • View Profile
Re: Question on this.
« Reply #7 on: July 10, 2023, 01:56:28 PM »
No, sorry. However, I remember John stating at one time very many years ago these types of engines were typically rated around 200 to 250HP depending on their use.

Ed
Logged

cook_dw

  • Hero Member
  • *****
  • Posts: 4076
    • View Profile
Re: Question on this.
« Reply #8 on: July 10, 2023, 03:10:19 PM »
Quote from: cook_dw on July 10, 2023, 01:26:27 PM
If I had to guess I'd say the H & B are flipped in the gang.  That would fall in line with a L48 w/ auto.  What is the casting date?


Ha!  I totally missed the 5 (03268) digits..   ::) :P
Logged

69Z28

  • Hero Member
  • *****
  • Posts: 928
  • 69 X33D80 Z28
    • View Profile
Re: Question on this.
« Reply #9 on: July 10, 2023, 03:48:57 PM »
Casting date.
Logged
GaryC

'UNRESTORED' 1969 Cortez Silver Z28 X33 D80

69Z28

  • Hero Member
  • *****
  • Posts: 928
  • 69 X33D80 Z28
    • View Profile
Re: Question on this.
« Reply #10 on: July 10, 2023, 04:03:14 PM »
Crank
Logged
GaryC

'UNRESTORED' 1969 Cortez Silver Z28 X33 D80

Stingr69

  • Hero Member
  • *****
  • Posts: 910
    • View Profile
Re: Question on this.
« Reply #11 on: July 10, 2023, 04:22:52 PM »
Large journal 327.  That crank flange looks like a 3.25" stroke and the block is a 4" bore.
Logged

bcmiller

  • CRG Member
  • *****
  • Posts: 4101
    • View Profile
Re: Question on this.
« Reply #12 on: July 10, 2023, 05:06:26 PM »
As Ed stated, it is a marine/industrial/agricultural use engine. My bet would be marine.
« Last Edit: July 10, 2023, 05:31:22 PM by bcmiller »
Logged
Bryon / 1968 Camaro SS 396 coupe - now old school 468 big block
1967 Camaro RS/SS 396 coupe L35/M40 - 4 generation family project
Looking for 68 Camaro with body # NOR 181016

69Z28

  • Hero Member
  • *****
  • Posts: 928
  • 69 X33D80 Z28
    • View Profile
Re: Question on this.
« Reply #13 on: July 10, 2023, 05:29:08 PM »
Thanks all for the back and forth. I'm sure the owner will be satisfied with this info.
Logged
GaryC

'UNRESTORED' 1969 Cortez Silver Z28 X33 D80
Pages: [1]
« previous next »