Author Topic: 1967 camaro 283  (Read 10217 times)

markf

  • Newbie
  • *
  • Posts: 2
    • View Profile
1967 camaro 283
« on: December 27, 2006, 01:27:46 AM »
i beleive i may have a 1967 camaro that originally came with a 283. iwanted to knowif they used any different codes than md or mj and how many 283 cars were produced ::)

gro51

  • Member
  • ***
  • Posts: 234
  • 68 SS/RS 350
    • View Profile
Re: 1967 camaro 283
« Reply #1 on: December 28, 2006, 12:52:42 AM »
My records show the following:

MD - 283 2bbl 4 speed
MJ - 283 2bbl powerglide

MO - 283 4bbl 4 speed
MP - 283 4 bbl powerglide

Sorry, I don't have any production numbers.
Joe
Schodack, NY

'68 SS/RS 350, M21, 3:73, Rallye Green, Black Deluxe Interior

RAfbody

  • Member
  • ***
  • Posts: 225
    • View Profile
Re: 1967 camaro 283
« Reply #2 on: December 31, 2006, 12:10:51 AM »
MO and MP are the codes for a 302.  MP being with AIR (smog pump) and MO being without AIR.
Russ

GaryL

  • Hero Member
  • *****
  • Posts: 538
  • Marilyn and me
    • View Profile
Re: 1967 camaro 283
« Reply #3 on: December 31, 2006, 03:46:39 AM »
i beleive i may have a 1967 camaro that originally came with a 283. iwanted to knowif they used any different codes than md or mj and how many 283 cars were produced ::)

NO first gen Camaros came with a 283 engine.
Gary

Lemans Blue X33. DZ, M20, manual steering. Only BU code rear end is original.

bertfam

  • Hero Member
  • *****
  • Posts: 4492
    • View Profile
Re: 1967 camaro 283
« Reply #4 on: December 31, 2006, 03:59:52 AM »
Sorry Gary. 193 export models came with the 283 engine rated at 195HP.

MJ engines were mated to a powerglide (total count 121) and MD engines were mated to either a 3 speed or 4 speed manual transmission (total count 72).

These cars were all built a the Norwood plant and shipped to Bloomfield, Michigan, where they were disassembled for export. The cars were then reassembled at their destination plant.

There was ONE ON EBAY that just ended.

Ed
« Last Edit: December 31, 2006, 04:17:12 AM by bertfam »

hotrod68

  • Hero Member
  • *****
  • Posts: 520
  • almost finished
    • View Profile
Re: 1967 camaro 283
« Reply #5 on: January 03, 2007, 04:45:39 AM »
Did the export cars have just the V emblem on the fender, like an Impala or Chevellle 283 badge, instead of the V with crossed flags like a 327? Very interesting. 
HotRod'68  1968 SS350 coupe undergoing frame-off resto/rod. 386/350/4.11s
Butternut Yellow    black standard interior

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5959
    • View Profile
Re: 1967 camaro 283
« Reply #6 on: January 03, 2007, 06:43:30 AM »
Actually, the 283 cars were assembled in Switzerland. It was a CKD plant ala the Phillipines.
Kurt S
CRG

GaryL

  • Hero Member
  • *****
  • Posts: 538
  • Marilyn and me
    • View Profile
Re: 1967 camaro 283
« Reply #7 on: January 04, 2007, 04:48:24 AM »
Uh, not in the USA. :-[

Thanks for the education. What, did GM have a bunch of old 283's laying around? Did export cars have a CID limit in different countries?
Gary

Lemans Blue X33. DZ, M20, manual steering. Only BU code rear end is original.

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5959
    • View Profile
Re: 1967 camaro 283
« Reply #8 on: January 04, 2007, 06:14:31 AM »
Taxes..... They can be pretty steep in some countries and are based on displacement.
Kurt S
CRG

 

anything