68 Camaro Center Rear Bumper Bracket Grommet

[68rs327conv]

Any suggestions on where I can get the rubber grommet for the center rear bumper bracket on a 68 camaro.  The license lamp wire goes thru the bumper bracket which has a rubber grommet.

It is GM 1367472 and is listed in the AIM on page 172 UPC12 C4 Rear License Lamp.

A source for a used one would be great also

Any help is greatly appreciated

Mike

[68Zproject]

Have you tried AMK?

[68rs327conv]

Yes, not listed in their catalog or online.  It is a 1" diameter hole, I picked up a rubber grommet from Lowes which I will try and should keep the wire from rubbing on the bracket, but prefer original if possible.

Mike

[jeff68]

My 68 had a plastic grommet in this hole.  Not sure where to get one.

[MyRed67]

My 68 had a plastic grommet in this hole.  Not sure where to get one.

  I agree with jeff68, my '67 also had the plastic grommet.  These are usually not in bad shape, in kind of a well protected area.