pointers for new hinges

[william1]

 OK after a search i gonna ask,, any pointers,, short cuts, to lining up camaro doors after installing new hinges.

[JohnZ]

Fit them fore-aft to the quarters, and up-down and in-out to the rockers; fore-aft and up-down is at the pillar side, in-out is at the door side. Remove the striker bolts first, fit the doors, then install the strikers last to set in-out at the rear of the door and smooth closing effort.

[mark x22]

If the door panels are off you can adjust the striker bolt from inside the door with the door closed through an access hole in the door latch .

[1968RSZ28]

There's tons of information for you on this subject in Section 6 of the 1969 Body by Fisher Service Manual.

Paul

[william1]

 thanks ,, will try and yes have fisher manuel coming,