Hey guys! I'm new to posting here at the forums, but I have used your website many times to answer the toughest of my Camaro restoration questions. Here is a tough one, at least from my perspective. I have a 1969 Camaro with a mono-leaf setup and a 10 bolt rear end. Needless to say, that just won't cut it!
So I purchased a Hotchkis multi-leaf setup along with the many other goodies to get rid of the mono-leaf setup. No problem installing. I purchased a 12 bolt rear end with casting number 3969341, which is stated in other forums as a late 1969 Camaro rear end or a 1970 Nova rear end. The rear end is built and ready to go, I moved the mounts to fit the new multi-leaf springs, but here is where my question comes into play. On the rear, I have 15" Torque Thrust D wheels that are 7" wide with a 4" backspace. The 10 bolt I took out is 1 inch shorter in width than the 12 bolt I am about to replace it with. This will increase each side by 1/2" by my calculations. Will the wheels and tires stay inside the fender well? Or will they rub? Feel free to correct any errors I may have made while typing this, and thanks in advance for your time! -ChALkY
