« previous next »
Pages: [1]

Author Topic: Oil Fill Cap Location  (Read 12272 times)

9T4Z

  • Member
  • ***
  • Posts: 239
    • View Profile
    • Gary's Camaro
Oil Fill Cap Location
« on: November 22, 2007, 07:13:58 PM »
They say there's never a dumb question   ???  but...

My 69 350 had the oil fill cap on the passenger side valve cover when I got it.   Seemed strange because the dipstick and hood lamp are on the drivers side.  I've seen pics with it on either side.

The car has cowl induction if it makes a difference, and basic orange valve covers.

If the cap should be on the passenger side, would the Tonawanda sticker be on the front of the passenger valve cover?

thanks for answers
Logged
Gary 9T4Z

94Z rag blower 491 rwhp (now 505!)
69 Pace Car, 70RS,91Z,91RS

68Zproject

  • Hero Member
  • *****
  • Posts: 1869
    • View Profile
Re: Oil Fill Cap Location
« Reply #1 on: November 22, 2007, 08:16:46 PM »
All the pictures I've seen show the oil fill on the driver's side.
Logged
68Z28

DAL777

  • Member
  • ***
  • Posts: 30
    • View Profile
Re: Oil Fill Cap Location
« Reply #2 on: November 22, 2007, 11:12:55 PM »
The oil filler cap goes on the drivers side (rear)
The  Tonawanda sticker goes on passenget side (front)
The oil dipstick is on drivers side.
If you look in the assembly manual, it is all there.  Many cars are incorrect.
Logged

Jonesy

  • Member
  • ***
  • Posts: 481
  • 1969 Camaro z28
    • View Profile
Re: Oil Fill Cap Location
« Reply #3 on: November 23, 2007, 02:09:22 PM »
And many cars had valve cover gaskets replaced and the cover put back on on the wrong sides.
DAL777 has it right.
Logged
1967 RS-Z/28 Nantucket Blue the D-2 car
1969 RS/SS 350 4 speed Azure Turquoise
1969 Z28 Azure Turquoise

9T4Z

  • Member
  • ***
  • Posts: 239
    • View Profile
    • Gary's Camaro
Re: Oil Fill Cap Location
« Reply #4 on: November 23, 2007, 04:03:34 PM »
Thanks guys... mine are off for repaint so they go back on today correctly...
Logged
Gary 9T4Z

94Z rag blower 491 rwhp (now 505!)
69 Pace Car, 70RS,91Z,91RS

9T4Z

  • Member
  • ***
  • Posts: 239
    • View Profile
    • Gary's Camaro
Re: Oil Fill Cap Location
« Reply #5 on: November 25, 2007, 01:50:07 AM »
 ???  Darn... I used silicone too.  No sooner put it on the drivers side and saw this survivor Z10 engine.  Texas Z10.   I know there are more out there with the oil fill cap on the passenger side.  I have several other pics.  Can't just be confusion when replacing the covers.
« Last Edit: November 25, 2007, 01:54:35 AM by 9T4Z »
Logged
Gary 9T4Z

94Z rag blower 491 rwhp (now 505!)
69 Pace Car, 70RS,91Z,91RS

68Zproject

  • Hero Member
  • *****
  • Posts: 1869
    • View Profile
Re: Oil Fill Cap Location
« Reply #6 on: November 25, 2007, 04:42:27 AM »
All I can say is I'm glad I have a 68.  I've never seen the oil fill on that side before.
Logged
68Z28

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: Oil Fill Cap Location
« Reply #7 on: November 25, 2007, 08:17:19 PM »
Quote from: 9T4Z on November 25, 2007, 01:50:07 AM
I know there are more out there with the oil fill cap on the passenger side.  I have several other pics.  Can't just be confusion when replacing the covers.

Yes, it's confusion on the part of whoever removed them and re-installed them on the wrong side; the one with the oil fill cap goes on the driver's side. They can also be installed upside-down, so the pushrod end of the rocker arms hit the inside wall of the cover.
Logged
'69 Z/28
Fathom Green
CRG

Gramps69Z

  • Hero Member
  • *****
  • Posts: 653
  • 69 X33 D80
    • View Profile
Re: Oil Fill Cap Location
« Reply #8 on: November 26, 2007, 04:59:29 AM »
   My thoughts are with you on this one JohnZ.  I guess it's hard to remember your left from right.
Logged
Captain John Wykoff
Destin Fire:   October 31, 2015 at 0700--Officially Retired

1968RSZ28

  • Hero Member
  • *****
  • Posts: 6188
    • View Profile
Re: Oil Fill Cap Location
« Reply #9 on: November 26, 2007, 05:24:33 AM »
Quote from: Jonesy on November 23, 2007, 02:09:22 PM
And many cars had valve cover gaskets replaced and the cover put back on on the wrong sides.

Quote from: WYKOFF69Z on November 26, 2007, 04:59:29 AM
I guess it's hard to remember your left from right.

I can understand somebody making a mistake by putting the valve covers on the wrong side.  What I can't understand is leaving them that way once they realize/see that the PCV hose is no longer routed the correct way!     >:(

Paul
Logged

DAL777

  • Member
  • ***
  • Posts: 30
    • View Profile
Re: Oil Fill Cap Location
« Reply #10 on: November 27, 2007, 03:15:49 AM »
That may be a 107,000 mile Texas car but the covers are on wrong... (as is other things on it)...it also looks like they may be newer model covers.  Look at the factory assembly manual.....it is in there.
Logged

9T4Z

  • Member
  • ***
  • Posts: 239
    • View Profile
    • Gary's Camaro
Re: Oil Fill Cap Location
« Reply #11 on: November 27, 2007, 07:22:49 PM »
 :)  OK so I am happy now.  I'm going to go with the consensus here and leave em where I put em....

I did look at the AIM but it is not an Engine assembly manual so I was not going to trust the sketches that relate to the installation of the other stuff...

Thanks guys for chiming in.
Logged
Gary 9T4Z

94Z rag blower 491 rwhp (now 505!)
69 Pace Car, 70RS,91Z,91RS

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: Oil Fill Cap Location
« Reply #12 on: November 28, 2007, 04:40:21 PM »
Quote from: 9T4Z on November 27, 2007, 07:22:49 PM
I did look at the AIM but it is not an Engine assembly manual so I was not going to trust the sketches that relate to the installation of the other stuff...

Thanks guys for chiming in.

The A.I.M. makes it quite clear - see UPC 6, sheet B1.
Logged
'69 Z/28
Fathom Green
CRG
Pages: [1]
« previous next »