Author Topic: L30/M20 info  (Read 8345 times)

belair

  • Newbie
  • *
  • Posts: 10
    • View Profile
L30/M20 info
« on: April 29, 2007, 03:37:39 AM »
hi, can anyone decode an engine pad # T1013HC ? its in a 67 L30/M20. thanks. anthony.

1968RSZ28

  • Hero Member
  • *****
  • Posts: 6188
    • View Profile
Re: L30/M20 info
« Reply #1 on: April 29, 2007, 04:52:57 AM »
Anthony -

Do you have the block casting number and the block casting date?

Paul

bertfam

  • Hero Member
  • *****
  • Posts: 4492
    • View Profile
Re: L30/M20 info
« Reply #2 on: April 29, 2007, 04:55:46 AM »
Anthony,

"HC" was used from 1965 through 1969 in a few different models and configurations:

1965 Full Size 327/250 with a Powerglide and a 4BBL carb
1966 - 1968 Full Size 327/275 with a Powerglide and a 4BBL carb
1969 - Nova and Camaro 350/250 with a 2BBL carb and manual transmission

As paul said, get the date code and casting number of the block and we can narrow it down for you.

Ed

belair

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: L30/M20 info
« Reply #3 on: April 29, 2007, 06:30:20 AM »
hi guys, thanks for the reply. cast# 3903352  date: h236. anthony.

Jonesy

  • Member
  • ***
  • Posts: 476
  • 1969 Camaro z28
    • View Profile
Re: L30/M20 info
« Reply #4 on: April 29, 2007, 05:16:56 PM »
Casting Date H236

Cast on August 23, 1966

3903352 casting =

1967 Fullsize 327/275hp
1967 Chevelle 327/275 and 325hp
1967 Camaro 327/210 and 275hp
1967 Corvette 327/300 and 350hp

T1013HC =

T= Tonawanda Engine
1013 = Oct 13 build
HC = 1967 Fullsize Chevrolet 327/275hp with Powergilide trans
1967 RS-Z/28 Nantucket Blue the D-2 car
1969 RS/SS 350 4 speed Azure Turquoise
1969 Z28 Azure Turquoise

belair

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: L30/M20 info
« Reply #5 on: April 29, 2007, 08:24:23 PM »
so dose it mean this car whitch is a L30/M20 is a clone because it is a factory 4 speed ? (im thinking of bying this car today). thanks. anthony.

lakeholme

  • Hero Member
  • *****
  • Posts: 2497
  • 68-12D L30/M35
    • View Profile
Re: L30/M20 info
« Reply #6 on: April 29, 2007, 08:41:17 PM »
Read through this carefully BEFORE you buy it as a L30/M20:
http://www.camaros.org/l30m20.shtml

There are several other things you need to check out...
All you've found thus far is that it doesn't have the original motor.

There are several things in the article that you need to check, for example:
"So it was not well-known (and still isn't3) that the L30/M20 Camaro was the only regular production 1967-68 Camaro outside of the SS/Z28 models to receive the heavy-duty "12-bolt" rear-end, right-side radius rod (in 1967), and multi-leaf rear springs (in 1968), as well as additional performance equipment otherwise exclusive to the SS or Z28 lines."

Good luck!
Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director

Jonesy

  • Member
  • ***
  • Posts: 476
  • 1969 Camaro z28
    • View Profile
Re: L30/M20 info
« Reply #7 on: April 29, 2007, 10:45:47 PM »
The engine info you gave indicates it is out of a Fullsize Chevrolet. It is not the original engine to the camaro.
1967 RS-Z/28 Nantucket Blue the D-2 car
1969 RS/SS 350 4 speed Azure Turquoise
1969 Z28 Azure Turquoise

belair

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: L30/M20 info
« Reply #8 on: April 30, 2007, 12:11:16 AM »
hi, it has the 12 bolt diff, rhs radius rod, p4 on the tag, ect. everything matches to what the artical says except the hc on the engine pad. anthony.

lakeholme

  • Hero Member
  • *****
  • Posts: 2497
  • 68-12D L30/M35
    • View Profile
Re: L30/M20 info
« Reply #9 on: April 30, 2007, 01:13:57 PM »
OK, so now the replacement motor becomes an issue in the value of the car.  You have the info. that you can use in your negotiations...
Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director