« previous next »
Pages: [1]

Author Topic: Master Cylinder Brake Lines  (Read 2972 times)

69RALLYSPORTZ28

  • Member
  • ***
  • Posts: 86
    • View Profile
Master Cylinder Brake Lines
« on: July 11, 2020, 11:59:20 PM »
Are there supposed to be looped brake lines leading from the Master Cylinder and proportioning valve to the brake lines to each wheel?
Is this typical of a decades old replacement of Master Cylinder?

Here is the link to the Z/28
https://pacificclassics.com/inventory/1969-chevrolet-camaro-z28-rally-sport/
Logged

Danzo

  • Member
  • ***
  • Posts: 497
    • View Profile
Re: Master Cylinder Brake Lines
« Reply #1 on: July 12, 2020, 12:52:31 AM »
Master cylinder is incorrect, should have bleeder screws Picture shows brake line routing.
Doc
Logged

BULLITT65

  • Hero Member
  • *****
  • Posts: 4480
    • View Profile
Re: Master Cylinder Brake Lines
« Reply #2 on: July 14, 2020, 04:17:21 PM »
The pic Dan provided also shows the metering valve in the right spot. I don't see where it is in your pic . (corrected, thanks Gary)
« Last Edit: July 14, 2020, 04:52:20 PM by BULLITT65 »
Logged
1969 garnet red Z/28 46k mile unrestored X77
-Looking for 3192477 (front) spiral shocks 3192851 (rear)
-Looking for an original LOF soft ray windshield
-Looking for original Delco side post negative battery cable part # 6297651AV

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5781
  • owner since 4-Apr-1976
    • View Profile
Re: Master Cylinder Brake Lines
« Reply #3 on: July 14, 2020, 04:38:24 PM »
Austin:  The proportioning valve if used is mounted on the frame rail under the driver.   The parts mounted just under the MC are described in JohnZ's brake article...  go read it.. :)     ie..   hold off valve, differential switch, metering valve etc...
Logged
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

1stgen68

  • Member
  • ***
  • Posts: 37
    • View Profile
Re: Master Cylinder Brake Lines
« Reply #4 on: July 14, 2020, 09:19:57 PM »
Those aren't proportioning valves. They are distribution blocks. They essentially do nothing but route juice and do not say you get this much in the back and you get this much in the front.
Logged
Pages: [1]
« previous next »
 

anything