Author Topic: 1969 350cuin positive wire to junction  (Read 2250 times)

emdoller

  • Member
  • ***
  • Posts: 56
    • View Profile
1969 350cuin positive wire to junction
« on: June 30, 2020, 09:35:31 PM »
I’m looking at the assembly manual trying to figure out how to route the brown wire that runs from the top mounted battery terminal to the junction box. Right now looking down onto the battery, positive is on the right and the brown wire comes out of the left and goes under the cable around the bottom (front side) of the battery. I don’t think that makes sense.

Ed

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: 1969 350cuin positive wire to junction
« Reply #1 on: July 29, 2020, 03:17:14 AM »
This is how I ran the one on my 69 Z, just make sure you do not set the battery on the wire and pinch it.  FWIW originally the positive battery post on a Y55 was closest to the fender with the neg closer to the engine.


James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

 

anything