« previous next »
Pages: [1]

Author Topic: quarter panel replacement  (Read 3940 times)

68SSL35/M40/O2

  • Member
  • ***
  • Posts: 58
    • View Profile
quarter panel replacement
« on: November 05, 2019, 12:43:17 AM »
I'm replacing the quarters on my 68 convertible. I'm going to do some additional blasting in the trunk area.  it seems to be no kind of coating on the inner structure. what do you guys recommend to spray in these area's...not even seen, but want to be as close to original as possible?
Logged

67CruiseMaster

  • Member
  • ***
  • Posts: 199
    • View Profile
Re: quarter panel replacement
« Reply #1 on: November 05, 2019, 02:46:43 AM »
In my opinion I'd use epoxy primer. Others might have a better suggestion but on my vert I have no rust at all from a Kansas car
« Last Edit: November 05, 2019, 04:33:10 PM by KurtS »
Logged
67 SS/RS with original Cruise Control
67 Tuxedo Black Convertible.

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5781
  • owner since 4-Apr-1976
    • View Profile
Re: quarter panel replacement
« Reply #2 on: November 05, 2019, 04:18:32 AM »
Epoxy primer on the bare metal, then coat that with whatever is necessary to appear as original...
Logged
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

68SSL35/M40/O2

  • Member
  • ***
  • Posts: 58
    • View Profile
Re: quarter panel replacement
« Reply #3 on: November 05, 2019, 08:02:54 PM »
It's just light surface rust.  Red oxide, or black  want it to look as factory
Logged

68SSL35/M40/O2

  • Member
  • ***
  • Posts: 58
    • View Profile
Re: quarter panel replacement
« Reply #4 on: November 16, 2019, 12:58:39 AM »
C'mon guys. I've been searching all of CRG, for what primer/color should be painted around the under rear package tray/inner structure for a convertible. bcmiller's Green L78 shows exactly what I'm looking for!  Quarters on going on this weekend!!
Logged

Sauron327

  • Hero Member
  • *****
  • Posts: 1414
    • View Profile
Re: quarter panel replacement
« Reply #5 on: November 16, 2019, 07:50:29 PM »
The inner structure, or skeleton, only got overspray from priming and topcoating. That is why when you tear these cars apart, the inner structure can have varying degrees of surface rust and/or clean bare metal. Read this: http://www.camaros.org/assemblyprocess.shtml I use black epoxy after blasting when replacing sheetmetal. Not sure what brand convertible quarters you are using, but I've rejected some because they were poorly stamped.
Logged
Pages: [1]
« previous next »
 

anything