Author Topic: Rear Suspension Hanger - Good or Bad?  (Read 3163 times)

bhay47

  • Newbie
  • *
  • Posts: 1
    • View Profile
Rear Suspension Hanger - Good or Bad?
« on: April 08, 2019, 06:27:04 AM »
Hi everyone,

I am looking at buying a 1967 Camaro and one of the photos I was sent (attached) looks like the right side rear spring front hanger bracket has been cut or torn... Can someone give me some info on how bad this is and what would be required to fix?

Car will be imported into Australia so it has to be mechanically fit.

Cheers
Brent 

x66 714

  • Hero Member
  • *****
  • Posts: 1810
    • View Profile
Re: Rear Suspension Hanger - Good or Bad?
« Reply #1 on: April 08, 2019, 11:30:49 AM »
Welcome to CRG. You'll find lots of great information here.

It looks like something was welded to it & then the weld broke.

Just for the record, that's the LH side.....Joe
See America's First, Chevrolet

1968 Z/28 Corvette Bronze. Black Hounds Tooth. 02E Los Angeles born 3/13/1968 pnt OO. Purchased March 1976
1969 SS396 Yellow/Yellow 08E Norwood born 8/28/1969 pnt 76E. Purchased April 1981

z28z11

  • Hero Member
  • *****
  • Posts: 1861
    • View Profile
Re: Rear Suspension Hanger - Good or Bad?
« Reply #2 on: April 09, 2019, 01:49:40 AM »
Likely more cosmetic than structural. Common to find cars with alterations like this, either where the spring bucket has been welded to the underbody, or some kind of subframe connector was welded in (I've seen both in cars used on the drag strip). Shouldn't be a big deal if that is the case, remove the remnants of the welds and/or replace the spring eye buckets with good used or reproductions.

Regards,
Steve
1968 Z28 M21/U17 BRG/W 1967 Chevy ll Nova SS 
1969 Z28 X77/M20/VE3 LeMans/W
1969 L78 X66/N66 Cortez/BVT
1969 Z11 L48/M35/C60/C06  1949 3100 5wd 235/6

 

anything