« previous next »
Pages: [1]

Author Topic: Is this a Z/28 Shifter  (Read 5298 times)

dannystarr

  • Hero Member
  • *****
  • Posts: 1745
    • View Profile
Is this a Z/28 Shifter
« on: June 12, 2018, 05:43:19 AM »
I was told this was a'67 Z/28 shifter, or just a 4 speed shifter. I can't find any numbers on it anywhere. Couple of stamps on the shift rods themselves. Has the word Muncie stamped in it... small thread size for shift ball, a very large stamped " T "  Seems to be in very nice original condition. Even has the orange grease holder cap. Or at least that's what I call it. Need to get a value on it for sale purposes. Have someone interested, but don't know what to charge.. $500? Thanx... Danny 
Logged

dannystarr

  • Hero Member
  • *****
  • Posts: 1745
    • View Profile
Re: Is this a Z/28 Shifter
« Reply #1 on: June 12, 2018, 05:54:06 AM »
more shifter
Logged

dannystarr

  • Hero Member
  • *****
  • Posts: 1745
    • View Profile
Re: Is this a Z/28 Shifter
« Reply #2 on: June 12, 2018, 05:55:04 AM »
still more
Logged

ZLP955

  • Hero Member
  • *****
  • Posts: 2186
    • View Profile
Re: Is this a Z/28 Shifter
« Reply #3 on: June 12, 2018, 06:47:45 AM »
Danny no idea on value, but regarding the details, assume you've read this? http://www.camaros.org/shifters.shtml
Logged
Tim in Australia.
1969 04A Van Nuys Z/28. Cortez Silver, Dark Blue interior, VE3, Z21, Z23, D55/U17, D80, flat hood.
Sold at Clippinger Chevrolet in Covina, CA.
AHRA Formula Stock at Lions Dragstrip, NHRA E/MP at Pomona Raceway

dannystarr

  • Hero Member
  • *****
  • Posts: 1745
    • View Profile
Re: Is this a Z/28 Shifter
« Reply #4 on: June 12, 2018, 05:32:32 PM »
I did read that.. LOTS of info to take in.. I think I have determined it's not a 3 speed, and it's not a big block shifter. Still hoping someone chimes in. Looks like there is no specific Z/28 shifter. Just a 4-speed shifter. Danny
Logged

169INDY

  • Hero Member
  • *****
  • Posts: 1895
    • View Profile
Re: Is this a Z/28 Shifter
« Reply #5 on: June 12, 2018, 06:04:56 PM »
I will dig mine out of  the box of parts and lay out the same photos for comparison, "SOME" (of the) parts have been fluffed (incorrectly,  blasted, Wire wheeled, zinc plated etc) and orig finishes lost forever,,,,,(DISCLAIMER)

JIM
Logged
Jim
68 SS/RS L35 Th-400 LOS
69 Pace Car L48 Th-350 LOS
68 Z28 M21 LOS

x77-69z28

  • Hero Member
  • *****
  • Posts: 1058
    • View Profile
Re: Is this a Z/28 Shifter
« Reply #6 on: June 12, 2018, 08:01:32 PM »
Danny, how are you, first of all. Second, that is the hi performance shifter for 67. The std shifter did not say uncle on it. That is the shifter that was on my 67 RS/SS 350.
Logged
69 Z/28 X77 burnished brown, 711 int 05A bought in 78
70 Z28 forrest green, green int, M40, bk vinyl roof PROJECT
99 SS hugger orange 6spd NO TTOPS bought new 1 of 54
15 z/28 Arctic white, A/C 505 HP #251

Kelley W King

  • Hero Member
  • *****
  • Posts: 1435
    • View Profile
Re: Is this a Z/28 Shifter
« Reply #7 on: June 12, 2018, 08:03:20 PM »
From reading the links it looks like there are at least some parts difference between the Muncie and the Saginaw. It would help the value if you determine which. If I had a SS car I was doing the Muncie would be what I was looking for. Just from memory it looks very similar to one I had from a 69 Chevelle that had a Muncie 3 speed. After several tries and being told that there were no Muncie 3 speeds in 69 I had to pull the trans and take it to the speed shop for the Hurst rep to see to get a shifter.
Logged
69 Z28 RS Scuncio Hi Performance
69 SS L78
67 SS Chevelle
64 Corvette
66 GTO Tiger Gold
77 Trans Am Special Edition

cook_dw

  • Hero Member
  • *****
  • Posts: 4076
    • View Profile
Re: Is this a Z/28 Shifter
« Reply #8 on: June 12, 2018, 10:20:10 PM »
Wow..

It’s just a Muncie shifter.  If the stabilizer bar is straight then it’s sb.  Bent then bb.  EVERY 4 speed Muncie in 67 & 8 received that shifter..  Everything you need to know is in that link..
Logged

cook_dw

  • Hero Member
  • *****
  • Posts: 4076
    • View Profile
Re: Is this a Z/28 Shifter
« Reply #9 on: June 13, 2018, 01:07:30 AM »
Let me elaborate on my previous statement.  If you could take better photos of the rods then you could determine for certain if they were 67 or 8.  The shifter body itself is the same.

From the perspective of the photos it appears to be a combination of 7 & 8 rods.
Logged

dannystarr

  • Hero Member
  • *****
  • Posts: 1745
    • View Profile
Re: Is this a Z/28 Shifter
« Reply #10 on: June 13, 2018, 08:27:24 PM »
Some Approximate Measurements to determine '67 or '68? All 3 rods measure 7/16ths inches. And two of the rods at the short mounting stud are 3/8ths. The first & Second gear at the short mounting offset is 1/4"   Danny
Logged

dannystarr

  • Hero Member
  • *****
  • Posts: 1745
    • View Profile
Re: Is this a Z/28 Shifter
« Reply #11 on: June 13, 2018, 08:28:56 PM »
Last One
Logged

dannystarr

  • Hero Member
  • *****
  • Posts: 1745
    • View Profile
Re: Is this a Z/28 Shifter
« Reply #12 on: June 13, 2018, 08:57:38 PM »
So looks like reverse and 3rd & 4th rods are '67 Muncie and 1st & 2nd rod is '68 Muncie. The stabilizer overall length is 9-7/8ths inches, and the slot in it is 1-1/8th inches. So that is small block '68 Muncie. Ok, so with that said. Value??  Danny
Logged
Pages: [1]
« previous next »
 

anything