Found this in a box outside in the rain

[Sauron327]

As I stated, prices vary depending on the vendor. This was left out when you quoted me. Keep digging and you willl find more price differences. Or just use your local contacts and grab parts from parts cars in the area.

Solenoid wire clip is $25 repro.

http://www.heartbeatcitycamaro.com/store/product/13263/Camaro-Starter-solenoid-wire-retainer-1967-1968-1969/

Brace is $10 repro.

http://www.heartbeatcitycamaro.com/store/product/13266/Camaro-Starter-motor-brace-SB-1967-1968-1969/

Paul

[rszmjt]

Well I tried looking through all my pics and did not have a good angle to see it present on my car (69Z). I am pretty sure I have the original starter on mine, but it could have been removed at one point. Any other 69Z or other 69 model guys have this bracket on their car?

Yep, My 06A RSZ28 still has both.

[BULLITT65]

Can you post a pic with it installed?

(Looking at the 1969 AIM on page UPC 6 page B7 it just shows the twisted bracket only.)

[1968RSZ28]

Can you post a pic with it installed?

(Looking at the 1969 AIM on page UPC 6 page B7 it just shows the twisted bracket only.)

Paul

[BULLITT65]

Thank you for the pic.

So is the twisted one correct for 69, or did they switch to the twisted one mid 69?

[1968RSZ28]

Thank you for the pic.

So is the twisted one correct for 69, or did they switch to the twisted one mid 69?

You're welcome!

No, read this CRG thread for more info...  http://www.camaros.org/forum/index.php?topic=8033.0

Paul

[BULLITT65]

I read the thread but the link to the correct one didn't work. I guessing the bracket Ed refers to is the angle bracket in Danny's post.

So were both brackets that Danny posted used throughout production of 1969? Or did they drop the figure 8 loop at one point and then just use the one?

[dannystarr]

Have not had a chance yet to check my car. But I am going to jack it up and take a look hopefully later today. Here is a picture I found this morning. Is this it?.. Danny

[dannystarr]

Well.. as it turns out, I checked and mine is missing. I should say the solenoid wire clip was missing. I installed it and was pretty happy with the score. I picked up that box that had been saturated from being in the rain, to dump it in the recycle and the bracket fell on the ground!! I had seen it before, but not for many years. Good stuff... Now I can trade the long bolt, washer, nut, and bracket hopefully for something that I need.... Danny

[x77-69z28]

Life is good!!

[bcmiller]

Original braces are easy to find.  Original solenoid clip, not so easy to find.