Correct Bi-metal choke kit

[bertfam]

You have the wrong pivot! (Which is why you're having problems finding the right coil.)

That's a very rare 68 427/390 only pivot and I know several guys that would love to have it!! As a matter of fact, I just contacted a guy on the NCRS looking for one, so you might be getting an email. He has the one YOU need!

My picture above is what you SHOULD have, and here's a page from the Chassis Service Manual showing what you DO have (far right drawing).

Ed

[Mike S]

 Ed, that looks like the correct linkage LVN has in his two pictures.
I am looking at my 7037210 (396/AT,AIR) and 7027211 (396/MT) and they have the same linkage as the 7027210.
The choke rod has to pull the linkage down to allow the choke butterfly to open.

Mike

[bertfam]

You're right. I was thinking 1968 when he actually has a 1967. He has the correct pivot as per the 1967 Service Manual. Sorry about that.

Ed

[LVN 67]

Thanks everyone for your input. Pivot was confirmed by Custom Rebuilt Carbs and 67CSM. Will try reversing the choke coil as Mike suggested. Again thanks to all.