1
Maintenance / Re: 68 camaro rs/ss Speedo cable routing and replacement
« on: October 12, 2021, 08:51:46 AM »
Hi Steve
I don't think this particular one but a 4 speed car
I don't think this particular one but a 4 speed car
News:
Welcome to the CRG Discussion Forum!
Classified ads are not allowed on the forum.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Maintenance / 68 camaro rs/ss Speedo cable routing and replacement
« on: October 10, 2021, 11:32:18 AM »
Hi All,
I have a 68 rs/ss muncie 4speed.
Sorry if this has been talked about recently but have a question if anyone can shed some light please.
1. My Speedo cable needs replacing but it's hard to identify if the previous owners have run the cable correctly...currently running downwards from the dash through the firewall then through the chassis back around on Top of the exhaust and into the inlet on the passenger side. This seems really wrong according to the manual but not sure. Also through the same whole in the f.w. there are wires passing through as well. Is the normal?
Thankyou in advance
Matt
I have a 68 rs/ss muncie 4speed.
Sorry if this has been talked about recently but have a question if anyone can shed some light please.
1. My Speedo cable needs replacing but it's hard to identify if the previous owners have run the cable correctly...currently running downwards from the dash through the firewall then through the chassis back around on Top of the exhaust and into the inlet on the passenger side. This seems really wrong according to the manual but not sure. Also through the same whole in the f.w. there are wires passing through as well. Is the normal?
Thankyou in advance
Matt
3
Decoding/Numbers / Re: understanding casting dates
« on: January 27, 2015, 10:10:56 PM »
Ok I'll double check tonight, what range should it be in
4
Decoding/Numbers / Re: understanding casting dates
« on: January 27, 2015, 08:53:43 AM »
Hey mate
My stamp reads BU0925G2 E
My stamp reads BU0925G2 E
5
Originality / Re: Info about my 68 camaro
« on: January 27, 2015, 07:04:02 AM »
No worries thanks for the explanation! 
6
Decoding/Numbers / understanding casting dates
« on: January 27, 2015, 06:13:03 AM »
Hi
Just trying to line up my castings dates of the diff to the build date of my car.
My car is an 07E car so wat should my diff cast date be approx.
Just trying to line up my castings dates of the diff to the build date of my car.
My car is an 07E car so wat should my diff cast date be approx.
7
Originality / Re: Info about my 68 camaro
« on: January 26, 2015, 11:37:59 PM »
Woops sorry. So would that be more for long distance high speeds/fuel economy or short distance speed
8
Originality / Re: Info about my 68 camaro
« on: January 26, 2015, 09:03:44 AM »
Hey fellas!
Having a 12 bolt diff with 3:73 ratio and multi leaf springs would that have been traditionly been specified for typically the more ppowerful cars? Or is this high ratio diff more specified for other needs
Having a 12 bolt diff with 3:73 ratio and multi leaf springs would that have been traditionly been specified for typically the more ppowerful cars? Or is this high ratio diff more specified for other needs
9
Originality / Re: rs Camaro
« on: January 23, 2015, 09:22:51 PM »
Thanks for verifying that, there's so much wrong information out there.
10
Originality / Re: rs Camaro
« on: January 23, 2015, 05:02:14 AM »
Hey guys
Just a query, is deluxe interior part of the RS package or can an rs come with standard interior.
Thanks
Just a query, is deluxe interior part of the RS package or can an rs come with standard interior.
Thanks
11
Restoration / Re: Wiring lume for the trunk of a 68 rs
« on: April 24, 2014, 08:31:50 AM »
Im guessing by the condition its the original one, not sure what brand. Yeah its the wheel arch in the trunk.
12
Restoration / Re: Wiring lume for the trunk of a 68 rs
« on: April 22, 2014, 08:17:17 AM »
Hey fellas
Just about to change the wiring harness in my 68 and noticed that there is a socket on top of the wheel arch. I'm assuming this is for
the under boot lighting if it was ordered or are the harnesses different for each?
Thanks
Matt
Just about to change the wiring harness in my 68 and noticed that there is a socket on top of the wheel arch. I'm assuming this is for
the under boot lighting if it was ordered or are the harnesses different for each?
Thanks
Matt
13
Restoration / Wiring lume for the trunk of a 68 rs
« on: April 02, 2014, 10:17:43 AM »
Hey Chaps
The wiring lume looks a bit tattered so I want to change the section that feeds the rear of my car (ie.lights) but following
the lume thru the trunk into the cabin it doesn't join anywhere. Does this mean that I would have to replace
the complete wiring lume in the car from front to back
Hope not
The wiring lume looks a bit tattered so I want to change the section that feeds the rear of my car (ie.lights) but following
the lume thru the trunk into the cabin it doesn't join anywhere. Does this mean that I would have to replace
the complete wiring lume in the car from front to back
Hope not
14
Restoration / Re: tank restoration
« on: March 29, 2014, 09:43:21 AM »
Hey,
Thats so interesting to hear about stories of the era. Only if we could go back in time and
get a brand new Camaro or hottie just how we wanted it and for the same price lol
Thats so interesting to hear about stories of the era. Only if we could go back in time and
get a brand new Camaro or hottie just how we wanted it and for the same price lol
15
Restoration / Re: tank restoration
« on: March 26, 2014, 09:51:25 AM »
Hey tim is it?
Im in South Australia.
The state with all the laws against driving LHD vehicles on the road
Pretty much anywayz
Im in South Australia.
The state with all the laws against driving LHD vehicles on the road
Pretty much anywayz