Messages

1

1967 - Orphans / Re: 7N184946 V0316MS

« on: August 19, 2024, 09:42:40 PM »

Hard to read.  I'll try for a better shot.

2

1967 - Orphans / 7N184946 V0316MS

« on: July 31, 2024, 09:04:24 PM »

7N184946

V0316MS

Casting number: 3892657

Casting date:  B137

Not for sale unless you have the car.

3

1969 - Orphans / Re: DZ302 block 9N567605

« on: September 07, 2022, 02:34:22 AM »

Please let us know if you get the engine back to the car.

4

Originality / Re: Original colors of 1st gen Camaros

« on: August 24, 2022, 02:36:19 AM »

An old thread but I have something that might be helpful.  This link is a great resource for researching paint colors.  Click on the GM Code for a color and you'll see everything GM used that color for.  Some go back a lot of years and had many names.  The link should take you page as it's broken down to 67 Camaro colors.  Lots of good information here.

https://paintref.com/cgi-bin/colorcodedisplay.cgi?year=1967&make=Chevrolet&model=Camaro&gncl=All&action=Get+Paint+Codes

5

Mild Modifications / Re: Looking for suggestions on new carb to replace Quadrajet

« on: August 23, 2022, 11:36:06 PM »

I think the shop is good.  They've done a crapload of quadrajets and came highly recommended. 

I know the carb needs the brass sleeves but he says it has other internal issues as well.  He's going to send me pictures so I can see exactly what he's talking about. 


I asked them to try to make this carb work. Finding another one might take awhile.  Meanwhile, I'll be on the lookout for another quadrajet that matches my car. 

Thanks for you comments and suggestions.

6

Mild Modifications / Looking for suggestions on new carb to replace Quadrajet

« on: August 22, 2022, 11:44:48 PM »

I have a 67 SS350 4 speed that's pretty much a stock restoration.  The quadrajet is in bad shape and the carb shop says it's not worth rebuilding.  I'm considering getting something new to replace it.  I want to drive the car so I'm looking for something that would just replace the quadrajet.

I've seen some new replacements that sell for around $220 that look pretty cheap.  Not leaning towards that.  I may go for another rebuilt quadrajet but for now I'm considering my options.

I'm wondering what brands and models others are using for an otherwise stock setup.  Currently using the Qjet 7027203.

Thanks.

7

Restoration / Re: Any good 67 seat tracks out there?

« on: September 29, 2020, 12:33:03 AM »

I'm just going to get a good used set. 

8

Restoration / Re: Any good 67 seat tracks out there?

« on: September 28, 2020, 05:12:21 PM »

Not that I'm aware of Mike.

9

Restoration / Re: Any good 67 seat tracks out there?

« on: September 28, 2020, 02:27:54 AM »

Repros I put in about 10 years ago.  They've never worked well.  Don't slide back and forth like they should.  Just a cheap part.  Don't recall who made them.  Hoping there's something better out there now.

10

Restoration / Any good 67 seat tracks out there?

« on: September 28, 2020, 12:16:18 AM »

The ones I put in my 67 don't work for crap.  Who makes good ones?

Thanks.

11

Maintenance / Re: 67 Electrical Problem

« on: August 09, 2019, 02:08:51 AM »

I was just adding something to power a dash cam.  I should have said Brake Warning Light on the gauge.  That's what stays on, with the courtesy lights.  Also, I didn't connect to any wires under the dash.  Just the fuse box.  Power from the ign-fused terminal and ground to a screw.  Worked well until I moved the device and heard it shorting out.

Thanks for your assistance.

12

Maintenance / 67 Electrical Problem

« on: August 09, 2019, 12:39:56 AM »

I was connecting an add-on electrical device to the  ign-fused terminal on the fuse block of my 67.  Once everything was connected I turned the key on sending power to the device.  I heard a slight "sizzling" sound in the device indicating a short and disconnected it immediately.  Verified that there was some intermittent contact with an ohm meter.  The fuse didn't blow.  Tested good. 

Now the brake light and under dash courtesy lights stay on.  Dash lights are off.  All worked well before.  Fuses all look good and voltages test good at the fuse box. 

Strangely enough, when I remove that 10 amp fuse at the ign-fused circuit the courtesy lights still stay on but the brake light goes out.  Everything else seems to be working.

Any suggestions?

13

Restoration / Coil Spring Spacers

« on: October 04, 2018, 11:39:14 PM »

I need to raise the front end of my 67 small block about an inch (measuring at the wheel opening at it's highest point).  I'm guessing 5/8 or 3/4 inch spacers would accomplish that.  I know a 1 inch spacer will net more than a 1 inch rise.  I'd appreciate some comments from those who have done this.  Open to suggestions.  Thanks.

Shelton

14

Mild Modifications / Which coil spacers to use

« on: September 12, 2018, 04:57:56 PM »

I need to raise the front end of my 67 small block about an inch (measuring at the wheel opening at it's highest point).  I'm guessing 5/8 or 3/4 inch spacers would accomplish that.  I know a 1 inch spacer will net more than a 1 inch rise.  I'd appreciate some comments from those who have done this.  Open to suggestions.  Thanks.

Shelton

15

1967 - Orphans / Re: 7n194946 MS Code 350

« on: September 12, 2018, 04:46:13 PM »

Fresh rebuild with zero miles.  It's in my car and not for sale.  If you have the car it came from we can talk.

Shelton