CRG Discussion Forum

Camaro Research Group Discussion => Restoration => Topic started by: cadmanof50s on December 04, 2010, 03:59:03 AM

Title: 68 Console Ammeter Wiring
Post by: cadmanof50s on December 04, 2010, 03:59:03 AM

The console ammeter has a connector with two wires:
a Black wire and a Black and White wire.
The ammeter terminal has one screw that is silver the other copper colored.
 
Which way does the connector go? Black wire to silver post and B/W to copper? or the other way?
 
The easy way to determine is to connect the battery and check to see if the needle is going in the right direction. But my car is apart and I would much rather not disassemble the console gages once it's together.
 
Does anyone have a picture of the wires/connectors at the gages of the console?
 
Thanks,
 
Vic

Title: Re: 68 Console Ammeter Wiring
Post by: 68Zproject on December 04, 2010, 04:06:47 AM

I don't know if this helps, but my wiring diagram shows the B/W wire goes to the bottom terminal.

Title: Re: 68 Console Ammeter Wiring
Post by: Boston14 on December 04, 2010, 03:14:04 PM

Try reading this topic.     http://www.camaros.org/forum/index.php?topic=4227.0

boston14

Title: Re: 68 Console Ammeter Wiring
Post by: cadmanof50s on December 04, 2010, 05:34:58 PM

Thanks  for the information, folks.

Boston14, the link has evrything I need, including an actual picture of the gage connections.

Many thanks!
Vic