CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: OLD IRON on April 27, 2010, 12:28:00 AM

Title: 68 RS wheelwell mouldings
Post by: OLD IRON on April 27, 2010, 12:28:00 AM

Hi CRG forum members.
Can anyone help with the original GM part #s for wheelwell mouldings on the 68 RS model?
I believe they differ to the non RS one's.
Thanks, Joe.

Title: Re: 68 RS wheelwell mouldings
Post by: flyingskibiker on April 27, 2010, 04:01:59 AM

9785880 right front
9785881 left front
7795063 right rear
7795064 left rear

Those are what I've found.  Rears are shorter than non-RS.  Fronts require trimming?

Title: Re: 68 RS wheelwell mouldings
Post by: OLD IRON on April 28, 2010, 08:27:29 AM

Thanks flyingskibiker.
I thought the front mouldings were also different part #s or were they trimmed from the factory?

Title: Re: 68 RS wheelwell mouldings
Post by: flyingskibiker on April 29, 2010, 12:48:12 AM

I believe there was a note on the instructions that they would have to be trimmed to fit an RS...  I think I saw a copy of them in a for sale ad. 

You can do a search on here using the part numbers and read a number of threads.  They are pretty old, usually.  And confusing in some cases.  But if one can wade through them, the info is there.  I did so awhile ago.  So, the whole thing isn't fresh in my mind.  I found out which part numbers I have to find.  The rest kind of fell out of my memory.  The numbers are in some notes I have lying around (huge stack).