CRG Discussion Forum

Camaro Research Group Discussion => Restoration => Topic started by: 70L34 on August 11, 2024, 05:26:59 PM

Title: 1968 Z/28 Rear Shackle Bushings
Post by: 70L34 on August 11, 2024, 05:26:59 PM

Hi folks, I bought a set of what were supposed to be old TRW shackle bushings for my 1968 Z/28, but the OD to spring ID clearance was substantial, so I’m pretty confident they are incorrect. Are one of you guys able to verify the part number, and who sells the best reproductions?

Thanks!
Tony

Title: Re: 1968 Z/28 Rear Shackle Bushings
Post by: GMAD_Van Nuys on August 11, 2024, 06:06:55 PM

Prior posting on bushings used on 1968 Z28:

https://www.camaros.net/threads/time-for-another-68-z-28-to-be-restored.182584/page-23#post-1677546

Title: Re: 1968 Z/28 Rear Shackle Bushings
Post by: x66 714 on August 11, 2024, 07:07:05 PM

I've only used the original GM. They pop up on e-bay from time to time. I collected enough to do both of my cars so I stopped looking for them....Joe

Title: Re: 1968 Z/28 Rear Shackle Bushings
Post by: rare396bronze on August 12, 2024, 12:11:35 AM

GM  # 3908370 Try calling a dealer and give them this # don't know if they are still available!

Title: Re: 1968 Z/28 Rear Shackle Bushings
Post by: 68camaroz28 on August 13, 2024, 11:21:18 PM

Quote from: GMAD_Van Nuys on August 11, 2024, 06:06:55 PM

Prior posting on bushings used on 1968 Z28:

https://www.camaros.net/threads/time-for-another-68-z-28-to-be-restored.182584/page-23#post-1677546

Per my build thread as GMAD Van Nuys posted I had mentioned back then years ago GM #3908370 is no longer available.